|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
Patterned or Textured Card Laminated Steel Plate MSP-P used in card laminator for card production purpose
( Key words: card lamination steel plate, laminator steel plate, textured laminating steel plate, special pattern lamination plate, card finish lamination plate, card production material )
Patterned or Textured Card Laminated Steel Plate are mainly used for personalized pattern finish card lamination. It can well ensure perfect plastic card surface finish after lamination. Our plates are being widely used by many card factories in both China and foreign countries worldwide
Key Features:
1. One side (pattern side) is covered with protection foils (blue thin films) to ensure good protection.
2. Only one side has the special pattern and another side has no pattern which will not contact the card surface in laminator. .
3. There are no scratches and dust on pattern surface and possibly there is slight scratch on another non-pattern side.
4. The edges are smooth and deburred with the round curved corners.
Product Technical Parameters
| Thickness range | 0.8 mm (Thickness tolerance: ±0.05mm) |
| Dimension tolerance | ±1mm |
| Plate size(L×W) | A4, A3 or custom-made size |
| Plate flatness level | maximum 1 mm |
| Surface pattern | special pattern |
| Surface hardness | HRC80±20 |
| Thermal transmission | 0.04cal/℃.cm.sec at 20℃ |
| Edge state | smooth and deburred with the round curved corners |
| Packaging box | solid plywood carton with soft cushion protection inside. |
