|
[China]
Trade Verify
Address: Liangxi District, No.100, Fengbin Road, Liandong U Valley
Contact name:Leo
Jiansu Hengsai Metal Co.,Ltd |
|
Verified Suppliers
|
|
|
Hot dip galvanized steel coil. The thin steel coil is immersed in the molten zinc bath, so that the thin steel coil with a layer of zinc adheres to its surface. At present, it is mainly produced by continuous galvanizing process, that is, galvanized steel coils are made by continuously immersing coiled steel plates in a plating tank with molten zinc;
Alloyed galvanized steel coil. This kind of steel coil is also
manufactured by the hot dip method, but immediately after it is out
of the tank, it is heated to about 500 ℃ to form an alloy coating
of zinc and iron. This galvanized coil has good paint adhesion and
weldability;
Specification
Hot SALES SGCC z140 zink galvanized steel 3 mm GI plain sheet
item | value |
Standard | AiSi |
Grade | SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z |
Application | making pipes, cutting sheets, making small tools, making corrugated
sheets, making container, Container Plate |
Place of Origin | China |
Tolerance | ±1% |
Processing Service | Bending, Welding, Decoiling, Punching, Cutting |
Steel Grade | 310S, 316L, 316, 321, 430, 309S, 304, 304L, 904L |
Surface Finish | 2B |
Delivery Time | 15-21 days |
Product name | Galvanized Steel Coil / Sheet |
Width | 600 - 1250MM |
Zinc Coating | Z30 - 600g/m2 |
ID of Coil | 508/610MM |
Thickness | 0.105- 4MM |
Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
HRB | Soft Hard (<60),Medium Hard (60-85), Full Hard (85-95) |
Packaging | Dust-proof kraft sheet, iron packing, Angle protective, packing
belt |
Payment Terms | T/T, LC, Western Union, Paypal, O/A, DP |
Regular Order | 25 tons or one container |
Galvanized Steel 0.18mm-20mm thick galvanized steel sheet 2mm thick
Hot dip galvanized steel sizes galvanized sheet metal roll
| bse metal type | Grade | CHEMICAL COMPOSITION % | |||
| C | Si | Mn | P | ||
| cold rolled steel sheet | DC51D+Z (St01Z, St02Z, St03Z) , DC51D+ZF | ≤0.10 | - | ≤0.50 | ≤0.035 |
| DC52D+Z (St04Z), DC52D+ZF | ≤0.08 | - | ≤0.45 | ≤0.030 | |
| DC53D+Z (St05Z), DC53D+ZF | ≤0.08 | - | ≤0.40 | ≤0.030 | |
| DC54D+Z (St06Z), DC54D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
| DC56D+Z (St07Z), DC56D+ZF | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
| hot rolled steel sheet | DD51D+Z (St01ZR, St02ZR) | ≤0.10 | - | ≤0.50 | ≤0.035 |
| DD54D+Z (St06ZR) | ≤0.01 | ≤0.10 | ≤0.30 | ≤0.025 | |
