|
[China]
Trade Verify
Address: RM 206,Zone C Building No.1,No.69 Tieshan Road,Baoshan District,Shanghai 200940, China
Contact name:Terry.Chang, Grace Gu
SHANGHAI LIJIN IMP.&EXP. CO.,LTD |
|
Verified Suppliers
|
|
|
Black Fiberglass filled Nylon Injection Moulded Ball bearing Wheel Nylon Parts material.
Specification
The proportion of | 1.16 |
Tensile strength | 96Mpa |
Stretching length | 30% |
FQA
Q:
Nylon rods, such ability of alkaline corrosion?
A:
Nylon products is a kind of alternative polymer materials of copper and other metals, has been widely
used in chemical industry, machinery, scientific research, etc...And has the high resistance
Alkaline, nylon rods density compressive nylon rods (Beijing) nylon rods density compressive...It is light
weight, high strength, corrosion resistance, resistance to pollution, construction is convenient,
The pattern...Artificial marble is composed of modified resin with gravel, neutral or alkaline. Features:
surface smooth level off, without concave and convex, acid-proof alkaline, anti-corrosive,
High mechanical strength. USES: used in chemical machinery, etc.
PA12-240 ~ 300 ℃ of modified engineering plastics such as nylon molding shrinkage (ASTMD955)
PA6 series molding shrinkage rate
Name and describe the molding shrinkage % note
Nylon Parts
15% glass fiber reinforced PA6 PA6G15 0.5 0.8
20% glass fiber reinforced PA6 PA6G20 0.4 0.6
30% glass fiber reinforced PA6 PA6G30 0.3 0.5
40% glass fiber reinforced PA6 PA6G40 0.1 0.3
50% glass fiber reinforced PA6 PA6G50 0.1 0.3
25% glass fiber reinforced flame retardant PA6 0.2-0.4 - Z - PA6G25
30% glass fiber reinforced flame retardant PA6 0.2-0.4 - Z - PA6G30
30% glass fiber enhanced halogen-free flame retardant PA6 0.2-0.4 - Z - PA6G30
Halogen-free flame retardant PA6 0.8-1.2 - Z - PA6
30% mineral filler halogen-free flame retardant PA6 0.5-0.8 - Z - PA6M30
30% glass bead filled PA6 PA6M30 0.8 1.2
Nylon Parts
30% glass fiber 0.3 0.5 PA6M30 mineral composite filled PA6
40% glass fiber 0.2 0.5 PA6M40 mineral composite filled PA6
0.6 0.9 PA6M30 30% mineral filled PA6
0.4 0.7 PA6M40 40% mineral filled PA6
PA6 injection molding grade 1.4 1.8 PA6
1.2 1.6 PA6 PA6 rapid prototyping
PA6 toughening PA6 1.0 1.5 in general
Nylon Parts
Display
