Automatic Glass Bottled Beer Filling Machine , Balanced Pressure
Monoblock Filler
Main Feature:
- This machine has a compact structure, perfect control system, easy
to operate and highly automated.
- The parts contact with product is made of quality SUS,
anti-corrosive, and easy to clean.
- By adopting high speed filling valve, the liquid level is precise
and no waste. That guarantees the demand of filling technology.
- The capping head adopts constant torque magnetic device to
guarantee capping quality and impact cap.
- This machine has a high efficient cap arranging system, perfect cap
feeding and protection device.
- Equipped with perfect clean management system to ensure the bottle
clean.
- Only by changing the star-wheel, can realize to fill the changed
bottle shape.
- The machine adopts perfect overload protective device can ensure
the operator and machine safe.
- This machine adopts adjustable frequency converter.
- The main electric components, frequency, photoelectric switch,
proximity switch, electric control valves all adopt imported
components, which can ensure the quality performance.
- The control system has many functions, such as control producing
speed, cap shortage detection, bottle block automatic stop and
production counting etc.
- The electric components and pneumatic components are all introduced
from world famous brand products.
Equipment Type | Automatic |
Bottle Type | Round or square glass bottle Volume 200 - 1500ml Bottle diameter 50-100mm Bottle height 160-340mm |
Output <bph> | up to 18000 bph |
Your product | Beer / wine / vodka / fruit wine and so on |
Certificates | CE / SGS / ISO 9001 |
Glass bottle Separating..
- Energy saving. High efficient. Adapt to customer factory layout
- Special lubrication system, keep products clean, health, safety
- Extended service life
- Electric eyes design keep whole line running safety and quickly
- Overload protection mechanism to effectively ensure the safety of
the machine
Glass Bottle Washing.
1.Except the down framework, the transmission parts and some parts
that must be made of special materials. Other parts are all made of
stainless steel 304.
2.The roller bearing is made of stainless steel, the sealing ring
is made of EPDM material, and plastic is made of UMPE.
3.The gripper is made of stainless steel, the position where hold
the bottleneck is made of food standard rubber;
4.The gripper equipped with high-efficient spray nozzle, it can
develop to any position of inwall of the bottle, and can save
rinsing water. There is a cover above the spray nozzle which can
prevent water spilling; and there are regulatory recycle slot and
recycle pipes under the nozzles. 5.Rinsing time can be guaranteed
for 4 seconds.
6.By adjusting the height of the rotary parts to adapt for
different bottle height
7.The motivation is driven from the driven system in the framework
passed by gear.
8.The supplying of rinsing water is controlled by solenoid valve
9.The high efficiency atomizing spray nozzle installed on bottle
clamp is capable of cleaning any part of bottle inner wall, and
also saves rinsing water.
10.The rinser is driven by driving system positioned inside machine
frame via gear transmission.
11.Rinser using high-strength stainless steel bottles of
spring-loaded folders, to ensure a stable reversal of the glass
bottles. The nozzle is a plum-like structure can wash every corner
of the side wall and bottom to make the bottle clean.
Glass Bottle Filling
1) Balance filling method.
2) Filling machine with cam-type mechanical lifting equipment to
upgrade glass bottles, large bearing support floundering in the vat
and use of guide-rod in the orientation of the structure
3) Long-tube filling valves are adopted, with CO2 fully exchanging
with air inside glass bottles, to decrease oxygen content
effectively. with air venting pipe liquid level control and backup
pressure controlled by a variable signal proportional. Fast,
stable, accurate, to be vacuum one at a time.
4) High-pressure foam stimulator is an option equipped to minimize
air remaining at the neck to be sure the Oxygen content less than
r0.15 mg O2/l
5) Centralized lubrication system, simple for maintenance.
6) Filling level tolerances : ± 2.0 mm
7) Bottle break rate : max. 0.01% (1:10,000)
8) Broken bottle automatically stopping valve is an option
9) With perfect CIP cleaning function, and capable of filling pipes
with acid, lye liquid and hot water.
10) All the materials in contact with the valves, tanks, pipes are
made of stainless steel 304 materials, inside and outside the wall
of mirror-polished, ensuring it is healthy.
Capping Part
1)Cap distributing chute is equipped with reverse cap stop and
reverse cap pick-out mechanism.
2)Cap distributing chute is equipped with a photocell switch to
stop the capper when there is no cap inside the chute.
3)The capper is equipped with inlet bottle detection switch.
4)Centrifugal way of cap arranging is adopted to reduce damage of
caps.
5)A cap inspecting system is applied to control on-off of cap
elevator.
6)Stainless steel plunger and mechanical stirring gland to ensure
that the gland is healthy and reliable. The capper has the out
loading function which could decrease the broken bottle number.
7)Special cap fixing and discharging mould for correct cap loading;
Competitive Advantage:
1. All the stainless steel is made of high quality of SUS304
material, good guarantee of food grade for
beverage production line.
2. The water treatment machines are with good polish and nice
appearance.
3. For the hollow fiber ultrafiltration machine, we have UPVC and
stainless steel filter pipe for choice.
4. We can make the machines customised for you.