Active Member
|
[China]
Address: Yihe building, Cangzhou City, Hebei Province,China
Contact name:Janson
Hebei Shengtian Pipe Fittings Group Co., Ltd. |
|
|
ASME ASTM A234 Wp5 180 Deg DN125 7D Carbon Steel Pipe Fitting Bend
Pipe fitting bend is a bending pipe that used to change the pipeline direction. It is similar to pipe fitting elbow, but differently pipe fitting bend is longer than elbow and usually manufactured for the specific needs.
So depends on different bending radius (R) to distinguish bend and elbow.
In case bending radius is more than 2 times of D (diameter), it is pipe fitting bend.
In case bending radius in 1D or 2D, it is elbow. (short radius elbow and long radius elbow).
Pipe Bending Radius: 3D, 5D, 6D, 8D and customized
Bending Degrees: 15°, 22.5°, 30°, 45°, 60°, 90°, 180° and customized
3D, 5D Pipe Bend - Common Use pipe fitting bend in Pipelines
3D and 5D pipe fitting bends are most common use in long pipelines, since they provide better efficiency in changing directions. After that is 6D and 8D pipe fitting bend, as the compensation to complete for small degree change.
Large Diameter Pipe Bend / Bending
Pipe fitting bend usually required in large diameter in oil and gas pipelines, since it has better capacity to transport the material, and long pipelines will need different radius of pipe fitting bend to be intalled in complex conditions.
HEBEI SHENGTIAN PIPE-FITTINGS GROUP CO.,LTD. | |
Hebei Shengtian Pipe-Fittings Group Co., Ltd. was established in 1989. We are located in Mengcun County in Hebei Province, covering an area of 100,000 square meters, with a workshop of 25,000 square meters and registered capital of $7,500,000. We are capable of manufacturing various pipe fittings. Our main products are elbows, tees, bends, reducers, caps, flanges and sockets. We have been in this line for about 20 years. Our products are exported to many countries and regions in Southeast Asia, the Middle East, Europe and America. | |
NAME | Pipe fittings bend |
PRODUCTS | Elbows,reducers,pipe tees,bends,pipe caps |
MATERIAL | Carbon steel,stainless steel,alloy steel We can produce according to materials appointed by consumers. |
STANDARD | ANSI,ASME,API5L,DIN,JIS,BS,GB we can also produce according to drawing by customers. |
WALL THICKNESS | Sch5-Sch160 XS XXS STD |
SIZE | 1/2-72 |
RANGE OF APPLICATION | Chemical industry, petroleum industry, construction industry, domestic installation and other |
SURFACE TREATMENT | Shot blasted, rust-proof black oil |
RADIUS OF CURVATURE | 1D-10D ANSI,ASME,API5L,DIN,JIS,BS,GB we can also produce according to drawing by customers. |
CERTIFICATES | ISO-9001:2000,API,CCS |
We have biggest pipe fittings production equipment in china,all of pipe fittings are products by ourself,so we can give you BEST price with BEST quality,hope happy cooperate with you! | |
Products Show
