Sichuan keluosi Trading Co., Ltd |
|
CNC Carbide Small hole inner diameter grooving blade 7GR1.5 For Cutting Off
Feature Advantage:
model | groove width | cutting depth | L | A |
6GR100 | 1 | 1.5 | 6.44 | 5.56 |
6GR150 | 1.5 | 1.5 | 6.44 | 5.56 |
6GR200 | 2 | 1.5 | 6.44 | 5.56 |
7GR100 | 1 | 1.5 | 7.36 | 5.56 |
7GR150 | 1.5 | 1.5 | 7.36 | 5.56 |
7GR200 | 2 | 2 | 7.36 | 5.56 |
8GR100 | 1 | 1.5 | 10.16 | 6.15 |
8GR150 | 1.5 | 1.5 | 10.16 | 6.15 |
8GR200 | 2 | 2 | 10.16 | 6.15 |
8GR250 | 2.5 | 2 | 10.16 | 6.15 |
8GR300 | 3 | 2 | 10.16 | 6.15 |
9GR100 | 1 | 1 | 12.95 | 7.7 |
9GR150 | 1.5 | 2 | 12.95 | 7.7 |
9GR200 | 2 | 2 | 12.95 | 7.7 |
9GR250 | 2.5 | 3 | 12.95 | 7.7 |
9GR300 | 3 | 3 | 12.95 | 7.7 |
Company Information:
We are trading company have two factory in Sichuan .China.
A manufacturer with 8 years experiences of producing carbide
cutting tools,
including carbide turning,milling,threading,grooving insert,carbide
end mill,drill bits,etc.
Complete specification of carbide milling insert.
Currently we have more than 2000 different products from mainly
brand all over the world.
sandvik,iscar,mitsubishi,kyocera,korloy,sumitomo,etc.
We can provide free samples for most products (except for a few
special ones, we can communicate with you in detail).You can add me
whatsapp to Communicate more.
Technical information :
Slotting and parting are unique turning applications for many
machining applications that require special tools. These tools can
be seen to some extent as an extension of ordinary turning.
Slotting and separating operations should consider three different
aspects to determine the best method and mold solution :
Parting and slotting workpiece characteristics :
Analysis of the groove to be processed size and quality
requirements : processing type, groove depth, groove width, outer
radius, quality requirements.
Workpiece material, shape and quantity.
Whether the material has good chip breaking performance
Production batch : single or batch slotting
Whether the workpiece can be safely clamped
Chip removal
Machine parameters.
Stability, power and torque, especially for large components
Cutting fluid and coolant
Long chip material whether need high pressure coolant to break
chips
Speed limit
Use all possible support
Timely replacement of worn inserts will make the cost of the new
inserts more economical than when excessive wear occurs.
Replace worn or damaged rods.
Don 't try to repair the turret.
model | L1(mm) | L2(mm) |
6GR | 6.44 | 4.76 |
7GR | 7.36 | 5.56 |
8GR | 10.16 | 6.35 |
9GR | 12.95 | 6.35 |