Home Companies Zhuzhou Gold Sword Cemented Carbide Co., Ltd.

Chemical Resistant Tungsten Carbide Square Bar , Wood Cutting Tungsten Carbide Blanks

Contact Us

[China]

Trade Verify

Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China

Contact name:Tracy

Zhuzhou Gold Sword Cemented Carbide Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Chemical Resistant Tungsten Carbide Square Bar , Wood Cutting Tungsten Carbide Blanks

Country/Region china
City & Province zhuzhou hunan
Categories Refractory

Product Details

Chemical Resistant Tungsten Carbide Square Bar , Wood Cutting Tungsten Carbide Blanks

 

Introduction of Tungsten Carbide Square Bar

 

Compared with steel strips, tungsten carbide strips are much more wear resistant and temperature resistant. They're widely use in many field such as woodworking, machining of refractory alloys, stainless steel, high manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc.

 

Applications of Tungsten Carbide Square Bar

 

Carbide plate is a highly efficient and green material, which features qualities of stainless steel: Corrosion resistance, oxidation resistance, wear resistance, bonding proof and acid-base resistance; And ensures its good strength, toughness, bending and stretching, impact resistance.

 

Tungsten carbide strip is used for woodworking cast iron cutting tool. It can be used in many field such as woodworking, machining of refractory alloys, stainless steel, high manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc

 

GSGradeISO GradeDensity (g/cm3)Hardness (HRA)T.R.S (MPα)Grain SizePerformance & Application Recommended
RX10K2014.6-15.090~90.52200~2400MediumHigh hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys.
RX20K3014.6-15.090~90.52600~2800FineHigh toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer.
RX10TK1014.6-15.092.5~931800-2000UltrafineHigh hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering.
AB10K4013.8-14.287.5~882800~3000CoarseHigh toughness, difficult to break tooth. Special used for finger jointing tool.
 

 

 

 

Traditional tool grades and usage recommendations

Iso classification grouping codeMark

Density

g/cm³

Hardness

HRA

Bending strength

≥ MPa

use
K01YD0514.9093.01600It is specially used for processing various nickel-based, cobalt-based, iron-based and tungsten carbide-containing self-fluxing spray alloy materials, and can also be used for the processing of hardened steel.
K05YG3X15.1091.81600Suitable for finishing, fine boring of cast iron, non-ferrous metal, heat resistant alloy and titanium alloy.
K10YD10114.9592.12500It has excellent wear resistance and toughness. It is used for finishing and finishing of non-ferrous metals and cast irons, especially for the processing of aluminum and its alloys. Turning is suitable for medium and high speed, and medium speed is recommended for milling.
YG6X14.9591.52300Suitable for finishing of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys.
K20YD20114.8991.02500Suitable for roughing to semi-finishing of heat resistant alloys and titanium alloys, cast iron and aluminum alloys.
YG614.9589.52000Suitable for semi-finishing and light-load roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys, titanium alloys and non-metallic materials.
YG814.7589.02200It is suitable for roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys and titanium alloys. It has high impact resistance and is suitable for continuous and interrupted cutting.
M05YS813.9092.51800It is suitable for the finishing of iron-based, nickel-based superalloys and high-strength steels. It is also suitable for the finishing of chilled cast iron, heat-resistant stainless steel, high-manganese steel, hardened steel and glass products.
M10YW113.091.51600Suitable for semi-finishing of stainless steel and common alloy steel.
YW312.992.01800Suitable for finishing and semi-finishing of stainless steel and common alloy steel.
M20YS2T14.4091.52500Suitable for finishing and semi-finishing of stainless steel and low alloy steels and iron-based alloys, as well as for integral milling of low alloy steels.
YW212.991.02000Suitable for finishing and semi-finishing and light-load roughing of stainless steel and alloy steel.
M30YL10.214.5092.02800Suitable for high temperature alloys, heat resistant alloys, titanium alloys, etc., especially for coarse and semi-finishing of aerospace materials, allowing intermittent turning with increased rake angle.
P10YC1010.3192.01600Suitable for finishing steel and cast steel, with cutting speed and low feed low depth.
P20YC20111.7991.81800Suitable for semi-finishing and light-load roughing of steel, cast iron and stainless steel, it is a universal mark with good applicability.
YS2513.090.52200Specially used for rough milling of steel and cast steel.
YT1411.4090.51800Specially used for semi-finishing of steel and cast steel.
P30YT512.8189.51900Specially used for heavy cutting of steel and cast steel, in the case of poor working conditions, roughingwith medium and low speed and large feed.
YC330S12.9590.52200Specially used for milling of steel and cast steel, it has good toughness and good impact resistance, and is the preferred grade for gravity milling.
P40YC4512.7590.02550

Suitable for gravity cutting of steel and cast steel, it can be used for large cutting, also for section milling.

 

 

OEM/ODM


Rich Experience In OEM

We are in a position to accept orders against customers samples specifying design, specifications

and packaging requirements.

Various kinds of Packing box are for your choose.

OEM Packing box with your logo is not a problem.

 

Hot Products

THICKNESS WIDTH LENGTH Size Tolerance Size Tolerance Size Tolerance 1~3 0~+0.3 4~6 0~+0.2 5~30 0~+0...
Strong Anti Corrosion Tungsten Carbide Strips With HIP Sintering Long Usage Lifetime Tungsten ...
Blade Sharpening Square Carbide Blanks , Customized Tungsten Flat Bar Introduction of Square Carbide ...
Blade Sharpening Square Carbide Blanks , Customized Tungsten Flat Bar Introduction of Tungsten ...
Strong Anti Corrosion Tungsten Carbide Strips With HIP Sintering Long Usage Lifetime Carbide Wear ...
Customized Finished Tungsten Bar Stock / Tungsten Carbide Alloy Strips Introduction of Tungsten ...