Active Member
|
[China]
Address: Building A3,Minor Enterprises Promotion Park,Huanghe Road(N),Tianyuan District,Zhuzhou,Hunan,China.
Contact name:Dora
Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd. |
|
|
Tungsten Carbide Drill Bits For Rock Drilling
Quick details
| Type: Power Tool Parts | Application: Mining | Trade Term: CIF,EXW,FOB |
| Grade: K10, K20, K30, C2, C6, YF06,YL10.2,G5 | Material: Tungsten carbide | Surface: Ground or Blanks |
| Trial Order: Acceptable | OEM Service: Acceptable | Delivery Time: Shipped in 15 days after payment |
Product Description
Carbide button is a type of rock drill bit widely used in geology and mining tools. The cemented carbide material has high hardness, good wear resistance and heat resistance, and the hard alloy drill bit has strong impact resistance, and has small loss and long service life in rock drilling and excavation processes.
When selecting a cemented carbide bit, it is necessary to selects the impact resistance and wear resistance of the cemented carbide material according to its special working environment. The parameters such as flexural strength, density, hardness, porosity and average particle size of tungsten carbide can reflect the impact resistance and wear resistance of the cemented carbide bit. In addition, these properties depend not only on the physical and mechanical properties of the cemented carbide material itself, but also on the robustness of the overall bit housing, the frequency of the impact power meter of the equipment, and the rationality of the technology used.
| Grade | Density (g/cm3) | Hardness (HRA) | TRS (N/mm2) |
| YK15 | 14.6 | 88 | 2600 |
| YK15.6 | 14.6 | 87.6 | 2700 |
| YK20 | 14.52 | 87.3 | 2800 |
| YG11C | 14.35 | 87 | 2850 |
Product show
Common alloy grates,ghysical mechanical properties and recommended application
| Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application | |||||||
| Grade | WC% | Co/Ni % | Physical and mechanical properties | Grain size (μm) | Recommended application | ||
| Density (g/cm3) | TRS (N/mm2) | Hardness (HRA) | |||||
| ZG01 | 100 | 0 | 15.3-15.5 | 1200 | 95.5 | 0.3 | Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability |
| ZG04X | 96 | 4 | 15.0-15.2 | 1600 | 92.8 | 0.8-1.0 | Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts |
| ZG06 | 94 | 6 | 14.8-15.1 | 2500 | 90.0 | 1.2 | Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure. |
| ZG06X | 94 | 6 | 14.8-15.1 | 2400 | 91.5 | 1.0 | Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance. |
| ZG06A | 94 | 6 | 14.8-15.1 | 2150 | 92.5 | 0.6-0.8 | |
| ZG08 | 92 | 8 | 14.6-14.9 | 2700 | 89.0 | 1.2-1.6 | Good general performance, used for general wear parts, molds, general tools, etc. |
| ZG10.2 | 90 | 10 | 14.3-14.6 | 3800 | 91.7 | 0.7 | Good general performance, suitable for casing and oil nozzle products |
| ZG11 | 89 | 11 | 14.3-14.7 | 2800 | 88.5 | 1.2-1.6 | Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries. |
| ZG12X | 88 | 12 | 14.2-14.5 | 3000 | 89.5 | 1.0-1.2 | Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings. |
| ZG15 | 85 | 15 | 13.8-14.2 | 3000 | 86.5 | 1.2-1.6 | |
| ZG15X | 85 | 15 | 13.8-14.2 | 4500 | 89.0 | 0.7 | Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc. |
| ZG20 | 80 | 20 | 13.4-13.8 | 3100 | 85.0 | 1.0 | Excellent wear resistance and toughness |
| ZN06 | 94 | 6 | 14.5-14.9 | 2000 | 90.0 | 1.2 | Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts. |
| ZN09 | 91 | 9 | 14.3-14.6 | 2300 | 89.0 | 1.2-1.6 | |
| ZN11 | 89 | 11 | 14.0-14.3 | 2600 | 88.0 | 1.2 | |
