Replace The Original License Plate Lamp
628 x 586
0.1-0.5 Lux/F = 1.2(O Lux with IR on)
-20℃-90℃ RH 95% Max
-40℃-80℃ RH 95% Max
Power Cable: 1m
Video Cable: 5m
Screws/Nuts(for bracket mount)
MA0428 this car specific camera for CITROËN Elysee,CHEVROLET
GL8/Lacrosse/Excelle with smart size design is installed for
replacing the original license plate lamp, it is easy and makes the
camera is original OEM style. The camera is with 3rd generation high definition CMOS sensor, that makes the camera
picture more sharpness and colorful image. And camera with the
distance scale line for drivers’ reference, and with wide viewing
angle & night vision& water proof.
With IP68 water proof, and weather resistant, that makes you can
use in any weather conditions and keep the quality.
- First, take down the car battery’s power supply line and keep it
away from electrode avoid cause an accident.
- Take down the license plate lamp.
- Get the camera’s lines across the license plate lamp original
- Fix the camera with the fastener or screw.
- Take the camera’s power line connect with the backup light’s power
- Take the camera’s signal line connect with one side of the signal
- Take the other side of the signal extension line connect with the
- Check if all lines are correct connected and arranged.
- Recover the car battery’s using then start the car the hang reverse
gear, the reverse image will appear on the monitor’s screen.
- Cover the car trunk.
The Matters Needing Attention:
- Can’t use the electric vehicle power supply connect with battery
power supply in order to avoid power supply is unstable.
- Must not rely on the car rearview camera , it is a auxiliary tool.
We must be carefully when reversing.
For CITROËN Elysee,CHEVROLET
High-definition, Night Vision, Waterproof, Colorful CMOS sensor
Warranty: 12 months