AT-9400 Luxury Spray Booth
AT-9400 Car Spray Booth gives stable working performance,it can
provide the car paint spraying process
with desirable working space,Auto-Tech product is considered as the
most ideal model for the auto repair shops
of our customers from home and abroad.It is usually appicable for
both car repair shops and common car 4S shops in
most mountries or regions where the envrionmental protection is
demanded.
AT-9400 Spray Booth Specification:
1.Outside size:(mm)7000x5560x3430 (LXWXH)
2.Inside size(mm):6900x4000x2800 (LXWXH)
3.Front door(mm):3000(W)x2700(H)
4.Total power:(KW) 17.5
5.Cabin System:
1)Wallboard: EPS (epispastics polystyrene) colorful steel skin
panel, 50mm Thick, tongue & groove style, compound
construction, anti-flame and heat-insulation, galvanized steel roof
panel.
2)Basement: galvanized steel sheet and square steel pipe
assembling, 1 row of grid and 3 rows of embossed plate floor, 3 pcs
of embossed steel ramps. 900X2000MM (WXH)
6.Circulation System: 2 Inlet fans and 1 outlet fan. Air
volume:24000m3/h; air speed: 0.35m/s.
1),Inlet fan:2sets*4KW,Model: YDW
4.5AL1,Blowercapacity:24000m3/h,Pressure:815Pa,Rolling speed:
900rpm
2)Outlet fan:1set*7.5KW,Model:YDW 5.6S,Blower
capacity:15000m3/h,,Pressure:810Pa,
Rolling speed:900rpm
7. Air Purification system: Dual filtering structure, the primary
filter can capture granules larger than 10 um. Ceiling filter
capture granules bigger than 4μm. Its filtering rate reaches 98%,
air pressure gauge,tsp≤1.4mg/ m3.
8. Heating System: Italy Riello G20 Diesel Burner, 180000Kcal/h,
20N Damp Motor. SUS304 stainless steel heating exchanger, argon arc
welding. Max Temp:80 degrees,Heating Time: 4-6min(20-60 degrees),
Fuel Consumption: 4-5kg/vehicle.
9.Lighting System:Ceiling Light: 32 pcs 36w Lamp; Bottom Light: 16
pcs 36w Lamp,1000Lux.
10.Controlling System: micro-computer programmed controlling, spray
& baking switch, light switch, emergency stop, breakdown alarm.
11.Environmental System: multi-layer fiberglass filter,active
carbon. More details to joyATgz-btbDOTcom.
12.Additional
1)Enclosed tank tool cabinet, could put the paint and tools
2)Track guide made of high quality steel,convenient for spraying
small workpiece
3)Configure one pc of trachea box box on the back wall of booth, a
built-in air compressor pressure gauge, pressure regulating valve,
trachea joints
