Car Jeep Radar BSD Blind Spot Detection System Sensitive

Plastic Blind Spot Auto Monitoring System Rely On Radar-Based Sensor Technology for Jeep Freedom

Description

• The blind spot monitor or blind-spot monitoring is a vehicle-based sensor device that detects other vehicles located to the driver’s side and rear. Warnings can be visual, audible, vibrating, or tactile.
• Blind spot monitors may do more than monitor the sides and rear of the vehicle. They may also include "Rear Cross-Traffic Alert", "which alerts drivers backing out of a parking space when traffic is approaching from the sides."

In addition to sounding an audible alarm(buzzer sound)and lowering the radlo volume(when playing therad10),the bsm system also activates the bsm warning light onthe rear-viewmirror to notifythe driver ofvehicles or objects in the monitoring area.
The bsm monitoring area covers approximately one lane on both sides of the vehicle.this area starts,approximately fromthe exterior rearviewmirror and extends to approximately 6m behindthe vehicle. whenthe vehicle is driving,the bsm system will monitor the area from 3 differenten try points (side, rear,overtaking)to determine whether a warning is needed.

Blind spot monitoring, if enabled in the radio,monitors rear blind zones on both sides of the vehicle viaradar.If avehicle is sensed in one ofthe blind spotzones,the driver will be notified via an iconin the outside rear view mirror on that side of the vehicle.
Rear cross path detection monitors for vehicles perpendiculartothe rear of the vehiclewhenin reverse.

Blind spot monitoring, if enabled in the radio,monitors rear blind zones on both sides of the vehicleviaradar.if avehicle is sensed in one ofthe blind spotz0nes,the driver will be notified via an iconin the outside rear view mirror on that side of the vehicle.
Rearcross path detection monitors for vehicles perpendicular to the rear of the vehicle when in reverse.the system provides feedback to the driver via audible chimes and visual icons.

The two radar sensors installed in the left and right reartaillights monitor the vehicles in the blind area.if other vehicles drive into the blnd area,the blind spot monitoring system control module will actively drive the yellowindicator light of the correspondin gexterior rear view mirror to lightup.at this time,when the vehicle changes lanes,the in-vehicle speaker wilemita "didi"buzzerto warn the driver,there are other vehicles in the blind areand itis for bidden to change lanes,there by playing a role in driving safety assistance.

                    THREE SETUP MODES

1.close: prohibitall visual and audible alarms related to the target of interest in the blind spotarea.
2.ledlighting: if there is awarningtarget in the blind spot area, the blind spot monitoring module onlyrequests the visual led alarm of the corresponding exterior rearview mirror.
3.the led lights up and the buzzer buz2es: if there is a warning target in the blind spot and the corresponding side steering switch is turned on, the blind spot monitoring module requests the visual led and audible alarm of the corresponding side mirror.on the contrary, ifthe turn signal switch is not turned on,only the Warning targetis detected,and only the visual alarm led indicator will be performed.

                    PHYSICAL PHOTO DISPLAY

About Installation

1. Installation manual:
• We have a detailed installation manual,which will be sent to you with the goods.
2. The vehicle configuration function (sales code) is activated.
• If you have wi-TECH1.0 vehiclediagnostic tool, we can remotely connect to your PC through ToDesk program for activation.
• If you have a third-party programming tool, you can also activate this function by yourself, such as Tazer, etc.
• If you need to buy wi-TECH diagnostic tool, please click "Buy wi-TECH"
PS: you need to consult the customer service for confirmation whether this product supports your vehicle or not,before placing an order.

Company Profile

Sichuan NUT Automobile Service Co., Ltd. is a modern company integrating R&D, design, production and marketing of automobile products. Since its establishment, the company has been engaged in the sales of automotive aftermarket products. At present, the company has five major departments: Purchasing Department, Marketing Department, Warehousing Department, Finance Department, and General Management Office. The Marketing Department has an e-commerce group and a store group, and the e-commerce group has professional e-commerce personnel such as operations, planning, art, and customer service. Be able to do a good job in online store operation and brand promotion and other e-commerce work.

The company has an excellent management team with rich experience, good management, good customer service, and high business quality. The company adheres to the principle of openness, cooperation, and win-win, and strives to continuously meet the needs of higher-level customers, and to ensure high quality and high requirements The concept is integrated into each company's products, serving customers and serving the society.

Certifications

Packing & Shipping

FAQ

Q1. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q2. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the freight.

Q3. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q4. How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit.

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.