Road Vehicles Auto Adaptive Cruise Control With Stop And Forward Collision Warning

Jeep Wrangler Auto Parts Adaptive Cruise Control, Black ACC with Stop and Forward Collision Warning

Description

Adaptive cruise control(ACC) is an available cruise control advanced driver-assistance system for road vehicles that automatically adjusts the vehicle speed to maintain a safe distance from vehicles ahead. As of 2019, it is also called by 20 unique names that describe that basic functionality. This is also known as Dynamic cruise control.

               WHAT IS ADAPTIVE CRUISE CONTROL

On the basis of traditional cruise control, the Adaptive Cruise Control System uses the front radar to actively detect the relative distance and relative speed of the vehicle in front and the vehicle. In this way, the Adaptive Cruise Control system actively controls the speed of the vehicle, and realizes the purpose of automatic car following, automatic braking, and automatic cruise. stop and go can be done!

01. FULL-SPEED ACC PLUS ADAPTIVE CRUISE

When the adaptive Cruise Control (ACC) is activated, it can automatically follow the car at any speed (0km/h). When ACC follows the vehicle in front and causes your vehicle to stop, when the vehicle in front starts to move within 2 seconds after your vehicle stops, without any intervention by the driver. If the vehicle in front does not start to move within 2 seconds after your vehicle stops, ask the driver to press the "RES" button or depress the accelerator pedal to reconnect to the current set speed.

02. CAR NALL ROAD CONDITIONS

Automatically increase or decrease the speed according to the distance of the

preceding vehicle, and follow the car automatically (the maximum speed will not exceed the set speed; the minimum speed depends on the preceding vehicle speed 0km/h ≤ following vehicle speed ≤ preceding vehicle speed).

03. INTELLIGENT FRONT COLLISION WARNING

When the Adaptive Cruise Control (ACC) system intelligently predicts that its maxi-mum braking level is less than a preset distance from a position, the "approach warning" will issue a warning. If this happens, while the adaptive cruise control (ACC) continues to apply the maximum braking force, the "BRAKE!"(brake!) visual alarm will flash in the meter display and beep.

           ORIGINATED FROM THE USA WORRY-FREE QUALITY

          1. SET (+)/ACCEL

          2. CANC/CANCEL

          3. SET(-)/ACCEL

          4. FIXED SPEED CRUISE CONTROL ON/OFF

          5. RES/RESUME

           1. DISTANCE INCREASE BUTTON

           2. ADAPTIVE CRUISE CONTROL (ACC) ON/OFF

           3. CANC/CANCEL

              SETING THE FOLLOWING DISTANCE IN ACC

1. LONGEST DISTANCE SETTING (FOUR BARS)       2. MEDIUM DISTANCE SETTING (TWO BARS)

3. LONG DISTANCE SETTING(THREE BARS)             4. SHORT DISTANCE SETTING (ONE BAR)

                            FCW BRAKING STATUS AND SENSITIVITY

FORWARD COLLISION WANING: OFF; ONLY WA-MING; WAMING+AATIVE BRAKING

FORWARD COLLISION SENSITIVITY: NEAR ;  MED; FAR.

                  PRECAUTIONS WHILE DRIVING WITH ACC

1. OFFSET DRIVING
ACC may not detect a vehicle in the same lane that is offset from your
direct line of travel, or a vehicle merging in from a side lane.There may notbe sufficient distance to the vehicle ahead.The offset vehicle may move inand out of the line of travel,which can cause yourvehicle to brake or accel-erate unexpectedly.

2. TURNS AND BENDS
When driving on a curve with ACC engaged, the system may decrease thevehicle speed and acceleration for stability reasons, with no target vehicledetected.Once the vehicle is out of the curve the system will resume youroriginal set speed.This is a part of normal ACC system functionality

3. USING ACC ON HILLS
ACC performance may be limited when driving on hills.ACC may notdetect a vehicle in your lane depending on the speed, vehicle load, trafficconditions.and the steepness of the hill.

4. LANE CHANGING
ACC may not detect a vehicle until it is completely in the lane in which youare traveling. In the lane changing example below,ACC has not yet detect-ed the vehicle changing lanes and it may not detect the vehicle until it'stoo late for the ACC system to take action.ACC may not detect a vehicleuntil it is completely in the lane.There may not be sufficient distance tothe lane-changing vehicle.Always be attentive and ready to apply thebrakes if necessary.

5. NARROW VEHICLES
Some narrow vehicles, such as motorcycles, traveling near the outer
edges of the lane or merging into the lane are not detected until they havemoved to the center of the lane.There may not be sufficient distance tothe vehicle ahead.

6. STATIONARY OBJECTS AND VEHICLES
ACC does not react to stationary objects and stationary vehicles. For ex-ample, ACC will not react in situations where the vehicle you are followingexits your lane and the vehicle ahead is stopped in your lane.Always beattentive and readv to apblv the brakes if necessarv.

About installation
1. Installation manual:
• We have a detailed installation manual,which will be sent to you with the goods.
2. The vehicle configuration function (sales code) is activated.
• If you have wi-TECH1.0 vehiclediagnostic tool, we can remotely connect to your PC through ToDesk program for activation.
• If you have a third-party programming tool, you can also activate this function by yourself, such as Tazer, etc.
• If you need to buy wi-TECH diagnostic tool, please click "Buy wi-TECH"
PS: you need to consult the customer service for confirmation whether this product supports your vehicle or not,before placing an order

Company profile

Sichuan NUT Automobile Service Co., Ltd. is a modern company integrating R&D, design, production and marketing of automobile products. Since its establishment, the company has been engaged in the sales of automotive aftermarket products. At present, the company has five major departments: Purchasing Department, Marketing Department, Warehousing Department, Finance Department, and General Management Office. The Marketing Department has an e-commerce group and a store group, and the e-commerce group has professional e-commerce personnel such as operations, planning, art, and customer service. Be able to do a good job in online store operation and brand promotion and other e-commerce work.

The company has an excellent management team with rich experience, good management, good customer service, and high business quality. The company adheres to the principle of openness, cooperation, and win-win, and strives to continuously meet the needs of higher-level customers, and to ensure high quality and high requirements The concept is integrated into each company's products, serving customers and serving the society.

Certifications

Packing & Shipping

FAQ

Q1. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q2. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the freight.

Q3. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q4. How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit.

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.