|
[China]
Trade Verify
Address: Room A, 10 / F, Block B, Wangfujing, 5 Huaxing Main Street, Jinjiang District，Chengdu，Sichuan，China
Contact name:Coco Huang
Chengdu Xiangdao Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2-Way Battery Car/Home Appliance Charging Socket 10A High-Power Charging
Product introduction:
The dual-channel intelligent charging socket is a new generation of
intelligent charging equipment. It is an AC power supply device
that integrates the functions of AC output power remote on-off
control, charging safety control, electricity metering, and on-time
billing. The device is compact and easy to install. The charging
power can reach 2.2kW, which not only supports the charging of
ordinary two-wheeled vehicles, tricycles, and elderly scooters, but
also can be extended to high-power electrical appliances such as
washing machines and wall-mounted air conditioners. The charging
mode can be changed in seconds while improving the safety of
electrical appliances. It has the functions of flexible payment,
full automatic stop, overload protection, etc. The payment method
can be selected by card swipe or code scan. It is a high-quality
high-power charging device with a wide range of application
scenarios.
Function description:
1. The dual-channel smart charging socket can connect up to 2
external charging devices, and the maximum charging power of a
single channel can reach 2.2kW.
2. The dual-channel smart charging socket can support two payment
charging modes: swiping card and scanning code. The specific device
payment function is subject to the order requirements. The scanning
code charging function needs to be connected to the cloud platform
before use.
3. The dual-channel intelligent charging socket has the function of
voice broadcast.
4. The dual-way smart charging socket can be charged by time or
power, and the charging mode can be changed in the setting
operation. At the same time, you can set the charging time or
charging power corresponding to 1 yuan. The factory default is time
charging, and the corresponding time is 1 yuan and 240 minutes.
5. The dual-channel smart charging socket has the function of
detecting high-power loads, and can set the power alarm value. When
the alarm value is reached, the corresponding charging circuit will
be disconnected. The factory default setting is 2200W.
6. The dual-channel smart charging socket can have the function of
swiping the card or scanning the code multiple times, and then
pressing the button to charge, and the charging time will be
automatically accumulated. The factory default setting is 1 time,
that is, after swiping the card or scanning the code once, you can
swipe the card or scan the code again.
7. Free charging function of dual-channel intelligent charging
socket, which can be used for some special occasions. By default,
this function is disabled.
8. Two-way intelligent charging socket can judge the fault circuit
caused by relay failure or metering fault, and display the fault
information of the circuit: ER3 means the socket is not connected
to the load, ER4 means power overload, ER6 means the internal
temperature of the box is too high.
9. When there is a power failure in the power grid, you can
continue to use the remaining time to charge after the call is
restored.
10. If the user unplugs the charger or the charger plug is not
firmly inserted, if there is still time or power remaining, an
alarm will be issued, and the power supply of the circuit will be
turned off within a set period of time.
11. When the two-way intelligent charging socket is used for
charging the battery car, when the battery car is fully charged, if
there is still time or power remaining, an alarm will be issued,
and the circuit will be turned off for a set period of time.
| Product model | AC-2Way |
| 1-Way Rated voltage | AC220V |
| 1-Way Maximum input current | 20A |
| 2-Way Rated voltage | AC220V |
| 2-Way Single channel Maximum output current | 10A |
| Voltage overload | 1.2 times the rated value (continuous); 2 ti mes the rated value for 1 second |
| current overload | 1.2 times the rated value (continuous); 10 times the rated value for 1 second |
| frequency | 50Hz±2 |
| Standby power consumption | 5W |
| Accuracy class | Voltage, current level 0.5, power, energy level 1 |
| Communication | RS485 interface, MODBUS protocol |
| Pressure resistance | Voltage signal input, relay output, RS485 communication, leakage current should be less than 2mA, no breakdown or flashover |
| Anti-static interference | Level 3 |
| Anti rapid burst | Level 3 |
| Anti-surge interference | Level 3 |
| Immunity to RF radiation | Level 3 |
| Use environment | Working temperature: -10℃~+55℃, Storage temperature: -25℃~+55℃, Relative temperature: ≤93%RH (40℃±2℃) without condensation, Altitude: ≤2000m |
installation method
1. The definition of the terminals on the back of the device is
shown in the figure below. If the ordered device is equipped with
4G function, please open the back cover on the back of the device
and install the SIM card before installing the device.
2. The installation position of the equipment is about 80CM high
from the ground. Use a marker to draw the two fixing holes of the
equipment. The distance between the fixing holes is 6cm, as shown
in the figure below.
Company Profile
Chengdu Xiangdao Technology Co., Ltd. is a company specializing in the overall solution of development, design sales and operation of new energy, including electric vehicle charging piles, fast charging stations, solar photovoltaic power generation systems, solar application products, etc..
We are committed to providing total solutions for the application of new energy technologies.
We have 5 major product lines.
1. DC charging pile: 30KW~360KW DC charging pile
2. AC charging pile: 7KW/11KW/22KW/42KW AC charging pile
3. Portable charger gun: 3.5KW/7KW portable charging guns.
4. Solar power generation components: photovoltaicpanels, controllers, inverters, energy storage batteries a full set of power generation components.
5. Solar energy applicationproducts: solar panel, solar reding lights, solar tents, solar street lights, solar . . monitoring systems, etc..
FAQ
Q: How long is your delivery time?
For charging posts, it is usually 3-10 days. If there is no stock, the production lead time is determined according to the order quantity. High-power DC char- ging posts usually need to be customized according to the customer's technical parameters.
Q: How long does it take to customize the prototype?
For charging piles, the prototype time is usually 7 days.
For DC charging post, the prototype time is usually 15 days.
For high power fast charging station, the technical parameters need
to be
determined before production, and the prototype time is usually 30
days.
Q: How to guarantee the service?
Our products are divided into two categories: household and
commercial.
For home chargers, we provide standardized service: 1 year warranty
+ remote installation and usage guidance + video installation
tutorial
For commercial chargers, we not only provide standardized services
for charging piles, but also provide payment software docking
services for opera
ting companies.
Q: How do you guarantee the quality of your products?
The charging post products we sell have passed GB certification in
China and CE certification in EU. For some other countries, the
relevant certifications are
in progress.
NOTE:
1- OEM supported.
2- Any requirement please contact us to talk about the details.
3- We will reply you for your inquiry in 24 hours.
4- If you have any questions about the charger, please contact us.
5- The above for reference only, final price decide by the charger KW, please contact us to get the correct quote.
