UCP306 UCP307 Aligning Pillow Block Bearings Pedestal UCP300 Series

UCP300 Series Plummer Block Bearing Pillow Block Housing

Pillow Block (Plummer Block)

They can be used on vertical, horizontal, and inclined surfaces. Pillow block bearings are constructed of a housing and an insert bearing, which are usually self-aligning.

Product Parameter of Pillow Block Housing

The following points should be paid special attention to during the use of the Pillow Block Housing
1. The use of the Pillow Block Housing cooling system.

When used correctly, the Pillow Block Housing cooling water not only prolongs the service life of the bearing housing, but also improves the production efficiency. The material of the Pillow Block Housing is generally made of special bearing seat steel through various treatments, and the best bearing seat steel also has the limit of their use, such as temperature. When the bearing seat is in use, if the mold temperature is too high, it is easy to cause early cracks on the surface of the mold core, and some bearing seats have not even exceeded 2000 mold times. Even the bearing seat is in production because the Pillow Block Housingtemperature is too high, the mold core has changed color, and even reached more than 400 degrees after measurement. Such a temperature is prone to cracks when the mold release agent is chilled. The products are also prone to deformation, strain, sticking, etc.
2.The Pillow Block Housingmust be preheated during the production process to prevent the occurrence of cracks caused by the sudden encounter of hot metal liquid in the cold bearing seat. More complex bearing seats can be liquefied with a blowtorch. The mold temperature machine is used in good conditions, and the relatively simple bearing seat can be preheated by slow injection.
3.Cleaning the parting surface of the Pillow Block Housingis very troublesome and easy to ignore. The operator should thoroughly clean the parting surface of the bearing seat with kerosene, which can not only prevent the bearing seat from being crushed, but also Moreover, after cleaning, the exhaust groove on the bearing seat blocked by the residue of the mold release agent or other dirt can be opened, which is beneficial to the discharge of the gas in the cavity during the injection process and improves the product quality.

Product Display of Pillow Block Housing