Active Member
|
[China]
Address: UNIT04,7/F BRIGHT WAY TOWER NO.33 MONG KOK RD KL HONGKONG CHINA
Contact name:Richard
Garant Optima Co., Ltd |
|
|
1Port gigabit fiber optic media converter
Product description:
This gigabit fiber optic media converter supports 1port 10/100/1000M Ethernet signal up to 20~80 km over a single-mode LC fiber. It is suitable for the transmission of urban backbone networks and mainly used for Gigabit links of Ethernet devices. It extends the transmission distance of the network through its own photoelectric conversion, and at the same time expands the bandwidth of the network to 1000M. Network switches and routers that comply with the gigabit ethernet standard protocol can well work with it.
Features:
1, Follow the IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX Fast
Ethernet IEEE802.3ab 1000Base-TX Giga Ethernet,IEEE802.3z 1000Base-LX/SX Giga Ethernet standard;
2, Card-type or Stand-alone type selectable, suitable for concentration management in 2U Racks
3,1000Base-T port auto-adaption,support full-duplex or half-duplex;
4, automatic adaptation to RJ-45 parallel interface and cross interface;
5, the maximum transmission distance of multimode fiber is 550 meters/single mode 20Km, and 40Km, 50,80Km selectable;
6, Real-time Led status indication for Power,Fiber,Ethernet,Working Mode,etc.
Product specification:
| Product Name:1Port gigabit fiber media converter | ||
| Network Electronic | Numbers of Interface | 1 x RJ45 |
| Rate | 10/100/1000Mbps adaptive | |
| Network Protocols | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX Fast Ethernet IEEE802.3ab 1000Base-TX Giga Ethernet,IEEE802.3z 1000Base-LX/SX Giga Ethernet | |
| Working Mode | Full/half duplex | |
| Network cable connection | Network cable cross/direct connection adaptive | |
| Network Cable | Cat6<100m | |
| Fiber | Wavelength | 1310/1550nm/850nm |
| Fiber Type | LC,Singlemode/Multimode | |
| Distance | Multi-mode: 550m; Single-mode: 20Km default,40/50/80KM selectable | |
| Rate | 1.25G | |
| General | Power Supply | Input Voltage:DC5V1A (external power supply), AC100~240V( Internal power supply) |
| Material | Iron | |
| Installation | Wall mount/Rack Mount | |
| Dimension | 95mm× 70mm× 25mm(external power,Type A) /30×108×138mm(Internal power,Type B) | |
| Package Size | 21.5x16x7cm | |
| Net Weight | 0.36Kg/pair | |
| Gross Weight | 0.65Kg/pair | |
| Working temperature | -20~60℃ | |
| Storage temperature | -25~65℃ | |
| Relative Humidity | 5%~95 %( no condensation) | |
Note:Installation selectable:
1, with case, can be inserted into a 14-slot rack for centralized management.
2, without case, can be inserted into a 16-slot rack, centralized management, support network management (customized)
Panel Diagram:
LED Indication:
FX ON—Optical Data 100M Working; OFF-- Optical Data 10M Working;
TX ON—Rj45 Data 100M Working; OFF—Rj45 Data 10M Working;
LINK ON---Fiber Connected Flash---Fiber Link Working Well
LINK(ACT) ON---CAT6 Cable Connected Flash---Ethernet Link Working Well
FDX ON---Ethernet Full Duplex OFF---Ethernet Half Duplex
PWR ON---Power On OFF---Power Off
Package Information:
Application Connection Diagram:
