Active Member
|
[China]
Address: Building 6, No. 578, Jinjin Road, Zhangpu Town, Kunshan City, Suzhou City, Jiangsu Province,China
Contact name:Eda Han
Suzhou Sanyouhe Electronic Technology Co., Ltd. |
|
|
160mm Custom Wiring Harness 22AWG 2pins Tinned LED Flexible Light Cable
Parameter:
| Product name | Tinned LED Flexible Light Cable |
| Conductor specification | 17*0.10TS |
| Terminal | Copper or customized |
| Outer diameter | 1.6mm or customized |
| Rated temperature | 80℃ |
| Tinned length | 3mm |
| Rated voltage | 12V |
| Interface type | AC/DC or customized |
| Insulation material | PVC or customized |
| Connectors | Customized |
| Work frequency | Low frequency or customized |
| Shape | Strip or customized |
| PIN | 2 pins or Customized |
| Pitch | 1.5mm or customized |
| Wire gauge | 22AWG or customized |
| Wire length | 160mm or Customized |
| Wire Color | Customized |
| Certificates | RoHS,CE,UL,TUV,ISO |
| MOQ | Small quantity can be accepted |
| Sample | Samples confirmed first before mass production |
| Sevice | OEM ODM accepted |
| Delivery Time | 3-15 days upon receipt of payment |
| Packaging | 00/200/300/500pcs per bag , then outside carton |
| Test | Professional breakover and pulling force test before goods sent out |
| Lead time | 3-15 days |
Product information :
The standard of the wire harness is mainly calculated by calculating its crimping rate. The calculation of the crimping rate needs to pass a special instrument. The standard tester for the wire harness cross section developed by Suzhou Oka Optical Instrument Factory is the most suitable for testing whether the wire harness crimping is qualified. Effective detector. Mainly through the steps of cutting, grinding and polishing, corrosion, observation, measurement and calculation.
1. The detection and judgment of the wire harness burn-out failure:
In the circuit of the power supply system, the wire bundle is burnt wherever it is grounded. The junction of the burnt and intact part can be considered to be grounded; if the wire bundle is burnt to the wiring part of an electrical equipment , Indicating that the electrical equipment is malfunctioning.
2. Detection and judgment of short circuits, open circuits, and poor contact faults between lines:
The wire harness is squeezed and impacted by the outside, causing damage to the wire insulation in the wire harness, resulting in short circuits between the wires. When judging, you can disassemble the wiring harness connectors at both ends of the electrical equipment and the control switch, and use the electric meter or test lamp to detect the short circuit of the circuit.
a. Wire break fault, in addition to the obvious breaking phenomenon, common faults mostly occur between the wire and the wire terminal. After some wires are broken, the outer insulation layer and the wire terminals are intact, but the inner core wire of the wires and the wire terminals have been broken. When judging, you can do a tensile test on the conductive wire and the wire terminal suspected to be broken. During the tensile test, if the wire insulation becomes thinner, you can confirm that the wire has been broken.
b. The line is poorly connected, and the fault mostly occurs in the connector. When a fault occurs, it will cause electrical equipment to not work properly. When judging, connect the power supply of the electrical equipment, touch or pull the relevant connector of the electrical equipment, when touching a certain connector, the electrical equipment will work normally and suddenly, indicating that the connector malfunction.
Our Services
1. Design and provide drawings service
2. Free sample service
3. Respond in time
4. OEM, ODM service
5. After sales guarantee service
Shipping:
1.FedEx/DHL/TNT/UPS/EMS/Aramex/SF for samples, Door-to-Door;
2. By Air or by Sea for batch goods;Airportport receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: 3-7 days for samples; 10-30 days for batch goods.
FAQ:
Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design.
Q:How can i get the price?
A:We usually quote within 24 hours after we get your inquiry(Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
Q:Can I buy samples placing orders?
A:Yes.Please feel free to contact us.
Q:What is your lead time?
A:It depends on the order quantity and the season you place the order.
Usually we can ship within 7-15 days for small quantity,and about 30 days for large quantity.
Q:What is your payment term?
A:T/T,Western Union,MoneyGram,and Paypal.This is negotiable.
Q:What is the shipping method?
A:It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).Please confirm with us before placing orders.
Q:How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q:Do you accept to customize products(OEM)?
A:Yes,we custom wire harness for clients,just send us samples and drawing about the products you need.
Q:Can you meet with UL,ISO etc.?
A:Yes,we have UL,ISO,ROHS,TUV certificates,also can meet with clients special required about other certificates.
Q:How about samples cost?
A:We charge samples based on the products,but most samples are free.
Q:Any requirement about the MOQ?
A:Our MOQ based on products.But most products MOQ are about 100-300pcs.
