Active Member
|
[China]
Address: No.9 Xiangdun Road,Huaxi Village,Jiangyin City,China
Contact name:Joyce Wang
Jiangyin Bosj Science & Technology Co., Ltd. |
|
|
Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine
1, Unit performance
The thickness of material sheet: 1.2-1.8,the product drawings need
to be confirmed by buyer
The width of material: 250≤§≤520
Product speed: 0-8m/min
Occupy groud area: length 30m xwidth 3m
Total power: about 62kw
2, Equipment structure
It is composed of passived-decoiler, leveler, servo feeding
machine, punching machine, roll forming machine, hydraulic cutting
machine, collection table, electrical control system etc.
3, Each part main parameter:
3,1 Passived Decoiler
Decoiler: decoiler, Inner expanding type, capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
3,2 Leveler
Motor: 7.5KW Frequency conversion motor
3,3 Servo Feeding machine
Drive: 4 kw Servo motor
3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov, Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
3,5 Forming machine
Rack: cast iron frame,
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power: 30KW Frequency conversion motor ZQ500 reducer
Drive type: every rack has one gear power distribution box.
Technical Parameter
Description |
Offered Specification |
| Rolling speed | 12-15m/min |
| Rolling thickness | 1.5mm-2.0mm |
| Raw material | Galvanized steel or blank steel |
| Roller stations | About 20 stations |
| Roller material | Gcr15, Quench HRC58-62 Plated Chrome |
| Shaft diameter | Φ76mm |
| Transmission | Gearbox |
| Material of chain | 45# Advanced Steel (Diameter: 76mm), thermal refining |
| Material of cutting | Cr12Mov with quench HRC58-62° |
| Tolerance | 10m+-0.5mm |
| Hydraulic station | 5.5kw |
3,6 Hydraulic cutting
Hydraulic pressure cutting
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece
3,7 Electronic controlling: PLC
Main Machine Parameter
| No. | Item | Unit | Data | Remark | |
1 | Raw material | Type | MSgalvanized sheet | ||
| Strength of panel | Map | ≥350 | |||
| Thickness of panel | mm | 1.2~2.0 | |||
| 2 | Size | mm | See figure | ||
| 3 | Speed | m/min | 6~8 | ||
| 4 | Material of roller | GCr15Hardening treatment | |||
| 5 | Drive type | Gear box | |||
| 6 | Total power | kw | About 45 | ||
| 7 | Electrical system | PLC Inverter control | |||
| 8 | Contour dimension(L*W*H) | m | 35X4X3.9 | ||
BOSJ OFFE Related Products
The details of the scaffolding machine
| NO. | CONTENTS | |
| 1 | Scaffolding plank standing tube welding device | |
| 2 | Scaffolding plank ledger welding device | |
3 | Punching Device | Full automatic punching device |
| Semi-automatic punching device | ||
| Manual punching device | ||
| Spare part:punching mould | ||
4 | diagonal brace flattening &punching device | Full automatic diagonal brace flattening &punching device |
| Semi automatic diagonal brace flattening &punching device | ||
| Manual diagonal brace flattening &punching device | ||
| Spare part:punching mould | ||
5 | Tube cutting machine | Auto Blade cutting Device |
| Swing saw cutting device | ||
| Direct saw cutting device | ||
| Auto direct saw cutting device | ||
| 6 | Auto Scaffolding plank wedling line | Auto robot welding |
| Auto robot hand welding | ||
| 7 | Base jack & U-head jack welding device | |
| 8 | Auto scaffolding plank roll forming machine | |
