Active Member
|
[China]
Address: No.9 Xiangdun Road,Huaxi Village,Jiangyin City,China
Contact name:Joyce Wang
Jiangyin Bosj Science & Technology Co., Ltd. |
|
|
Unistruct Solar Stand C Channel Roll Forming Machine
1. Standard thickness: 1.5mm, 2mm, 2.5mm,2.75mm, 3.0mm
2. Standard length: 2440mm, 3000mm, 5800mm, 6000mm and customized
3. Standard size: 41*21, 41*41,41*62,41*72,41*82, back to back,
41*41.41*21,
Other sizes be produced according to customer’s drawing.
BOSJ offer sample design,or you can offer your sizes.We will offer you the suitable technical proposal and machine structure.
Production Line Component
Equipment part list of automatic U type auto punching/roll forming machine
| No. | Name | Type | Quant. | Power of motor (KW) |
| 1 | Passive Decoiler | MT-300 | 1 set | |
| 2 | Leveler | HS-300 | 1 set | 3 |
| 3 | Servo-feeder | NCF-300 | 1 set | 2.2 |
| 4 | JF21-80 Punching machine | YANGLI GROUP | 1 set | 7.5 |
| 5 | Punching mould | 1 set | ||
| 6 | Roll forming machine | Gantry gearbox | 1 set | 18.5X2 |
| 7 | Flying Hydraulic cutting | 1 set | 5.5 | |
| 8 | Run-out table | SL-300X4000 | 1 set | |
| 9 | Electric control system | 1 set |
Main technical parameters
1. Machine Technical parameters
Width of material sheet:≤200 mm
Thickness of material sheet: 0,95 mm up to 1,55 mm
Material of sheet:Galvanized Steel,etc
Line production speed:15-20m/min(including punching/forming/cutting)
Length of the work piece:3000mm-6000mm.
Total Power: 48.2 KW.
2. Machine General Working Condition
Area of production line: length45m x width 3.5m x height 5m
Feeding direction: from left side to right side
Power: 380V, 50Hz, 3 phase
Pneumatic station: pressure 0-0.6MPa.,0.5m3/min.
Hydraulic oil: 46# Hydraulic oil
Gear oil: 18# gear oil
3. Unistruct Drawing or Size
4.Main Machine Technical parameter
| ,NO. | Name | unit | parameter | remark | |
1 | materials | Type | Mild steel galvanized sheet | ||
| Plate strength | ≥350 | ||||
| Plate thickness | mm | 1.5~2.5 | |||
| 2 | specification | mm | See the picture | ||
| 3 | speed | m/min | 6~8 | ||
| 4 | Material of the roller | GCr15 Hardening treatment | |||
| 5 | drive type | Gear box | |||
| 6 | power | kw | About40 | ||
| 7 | Electrical control system | PCL frequency control | |||
| 8 | Size(lengthXwidthXheight) | m | 35X4X3.9 | ||
