Home Companies Jiangyin Bosj Science & Technology Co., Ltd.

Column Door Frame Roll Forming Machine 14mm Plate Gear Driving PLC Controller

Active Member

Contact Us

[China]

Address: No.9 Xiangdun Road,Huaxi Village,Jiangyin City,China

Contact name:Joyce Wang

Jiangyin Bosj Science & Technology Co., Ltd.

Column Door Frame Roll Forming Machine 14mm Plate Gear Driving PLC Controller

Country/Region china

Product Details

Hot dipped Galvanized Vineyard Stake is used in viticultural plantation or other farm usage.

Details:

1. Section size: 50x30mm

2.Thickness: 1.5mm as usual

3. Length: 4ft,5ft,6ft,7ft, 8ft

4. Finish: Hot dipped galvanized, Electro Galvanized, Powder coated or PVC Coated

Usage: be used in viticultural plantation or other farm usage.

Feature:

• Strongest design, easy installation and long lasting.
• Wire slot that provides complete control of trellis wires
• Reduced installation and set-up costs

Specification:

ProductSpecificationSurface Finishing
Vineyard Stake50x30x1.5mmx2.5m

Galvanized

Powder coated

50x30x1.5mmx2.4m
60x40x1.5mmx2.4m
60x40x1.5mmx2.5m
50x40x1.5mmx2.4m

 

Equipment Description

1. Material:

1) Suitable Coil Thickness: 1.5-1.8mm

2) Suitable Raw Material: Galvanized steel sheet

2. The Chart of Process flow

Manual de-coiler --- Electric Feeding --- Servo motor feeding ----Roll Forming Machine--------Automatic cutting Mechanism ---Run-out Tables

3. The equipment including

Roll forming machine1 set
Hydraulic cutter1 set
Electrical control system1 set
Hydraulic system1 set
Normal run out table3 PC 1m*1m
Manual de-coiler1 set Max. loading 5 T

4. Technical specification and details

(1) Hydraulic Ue-coiler

Un-power: manual de-coiler; Max. Capacity: 7T

Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm

Manual power expands the coil inner surface.

 

 

(2) Roll forming machine

 

1) Number of forming steps: 17 steps

 

2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 85mm ,total solid

 

Tolled shafts

 

3) Rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that to ensure long life of forming rollers.

 

4) Main motor power: 4 KW with cyclical planetary gear speed reducer

 

5) The plating chromium’s thickness on the surface of rollers: 0.05mm

 

6) Main stand: 350# H steel welded structure Wall plate thickness: 14mm the main frame of machine is welded separately and the outside wall is connected by screw after being rot blasted on the surface.

 

7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically.

 

8) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement)

 

9) Line working speed (Forming speed): about 15-18 m/min (without cut time)

 

10) Main machine motor power: about 5.5 KW (Depend on final design)

 

Dimension of the machine: 9000mmx1200mmx1200mm

 

Weight of the machine: about 5000kg

 

(3) Hydraulic Cutting

 

1) Adopts post cutting, Stop to cut;

 

2) The cutting blade material is Cr12 with quenched treatment.

 

3) Adopts welded frame for good rigidity.

 

4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.

 

5) The power of cutting is provided by hydraulic station.

 

6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.

(4) PLC Control System

 

1) This system uses Delta PLC to control the all working actions. Production quantity and each piece length will be automatically measured. It is convenient to control the roll forming machine.

 

2) Delta converter adjusts speed technology, realize the automatic production.

 

3) Text screen is input and cancelled the working data.

 

4) Friendly man-machine interface system can be set batches to the work piece, length, quantity, etc.

 

5) Encoder count, having function of count and measuring length.

 

6) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement)

Hot Products

building material making machinery cable tray roll forming machine Please choose what you required, ...
Fully Automatic Galvanized Steel Cable Tray Machine With Hydraulic Punching Please choose what you ...
Cable Ladder Roll Forming Machine for Making Steel Cable Tray Ladder Profile Please choose what you ...
Perforated Cable Tray Roll Forming Machine Hydraulic Cutting Cold Making Machine 1. Technological ...
Automatic Steel Different Width Cable Tray Roll Forming Machine for Brazil 1. Technological Process ...
Customized European Standards Cable Tray Roll Forming Making Machine for Singapore Please choose ...