Beyde Trading Co.,Ltd |
Verified Suppliers
|
|
China Maufacturer Direct Factory Wire Cable Making Planetary
Stranding Machine
Cable Manufacturing Equipment:KS500/48+48 Steel Wire Armouring
Machine
The machine is used for single-layer steel armoring or copper wire
screening of cables, as well as twisting Al and copper wires,
stranding control cables, rubber and insulated cables, also
metal-taping function.
Main Features
1. The main shaft is made of a seamless steel tube, supported by
double-row roller on both ends.
2. The back-twisting is completed by planetary gears which are
bevel gears subject to heat treatment and have good resistance to
abrasion and continuous motions.
3. The dog pin for the bobbin has spring inside, easy for loading
and unloading the bobbin.
Description | 315mm | 400mm/12+18+24 | 400mm/36+36 | 500mm/48+48 |
Single wire Dia. (mm) | Φ0.8-Φ1.2 | Φ0.8-Φ2.0 | Φ0.8-Φ3.5 | |
Stranding Dia. (mm) | ≤Φ10 | ≤Φ55 | ≤Φ100 | ≤Φ130 |
Cage rotation (rpm) | 199.4 | 118 | 44 | 38 |
Stranding pitch (mm) | 100-300 | 63-1067 | 88-1499 | 116-2019 |
Capstan wheel (mm) | Φ1000 | Φ2000 | Φ2500 | Φ2500 |
Capstan linear speed (m/mim) | 3-30 | 4.85-35.6 | 3.8-28.2 | 4.4-32.3 |
Main motor (KW) | 22 | 45 | 55 | 75 |
Bobbin in the cage | PN315 | PN400/PND400 | PN400/PND400 | PN500/PND500 |
Central pay off bobbin | PN630/PN1250 | PN1250/PN2000 | PN1600/PN2500 | PN2500/PN4200 |
Take up bobbin | PN1000/PN1600 | PN1600/PN2500 | PN2000/PN3150 | PN2500/PN4200 |
4.2 48/400 main cage
4.2.1 The main cage gearbox is six-speed gearbox.use Hard tooth
gear. left and right turn and space function.
4.2.2 The twisting cage is composed of a gearbox, a seamless hollow
shaft, a winch, a wire rack, and an air brake device. Each section
of the host is supported by a multi-section tugboat with a seamless
hollow shaft, which has good rigidity and stable operation. After
the winch, a new type of gear back-twist mechanism is installed.
Through this mechanism, back-twist is achieved, which has the
characteristics of small gear clearance and low failure rate..
The use of tension band to adjust the tension in the cage wire rack
can make the tension of the core wire released on each cradle be
stable and balanced; the top of the wire coil adopts the thread
structure; the screw sleeve is equipped with a rolling bearing; the
rolling bearing supports the top; the threaded sleeve stretches
freely and is installed; With locking mechanism, the upper and
lower thread plates are convenient and quick.
4.2.3 Each winch is connected with the main shaft through the
flange plate. The main shaft is made of large-diameter seamless
thick-walled steel pipe. The overall rigidity is good, the
coaxiality of the winch is high, and the balance operation of the
winch is high;
4.2.4 All wire nozzles are made of tungsten steel.
4.2.5 The main cage brake adopts plane air brake.
4.2.6 cage speed range 23.83~53.01r/min
4.2.7 armouring pitch 75.1~1262mm
4.2.8 cage inner pay off size DIN400