Orange Color TQD2500 Pneumatic CAT Traction Device 960rpm AC
motor Haul-off
1,Φ2000 portal type pay-off machine:
- Take-up form: upper casing type, gantry ground rail walking type;
- Reel dia:Ф1000-Ф2000㎜;
- Take-up tension form: manual friction disc (tension adjustable);
- Travel motor: BWED121-23×17-1.5KW (AC motor)
- Lifting motor: BLD11-43-1.5KW (2 sets)
- Clamping motor:Y90L-6-B5-1.1KW,960rpm
- Structure form:
Potal rail walking type, upper casing type structure. The gantry is
made of bending and welding. The two tops of the reel are driven by
two motors via a cycloid reducer to lift the screw nut. Each apex
can be lifted separately or simultaneously, and is equipped with
mechanical and electrical protection devices. It can be equipped
with different specifications of the top sleeve to meet the
installation of different specifications of the reel; the reel
clamping is realized by the motor cycloid reducer, and the clamping
overload protection is provided. The tension of the pay-off is
realized by manual friction disc, which is manually adjustable and
stable. Reliable and easy to operate. The take-up frame adopts the
centering device to realize the centering line.
PN2000portal take up and traverse
- Line-receiving form: upper casing type, gantry ground rail walking
type;
- Coil diameter range:Ф1000-Ф2000㎜;
- Reel load weight:13T;
- Take up speed:2.3-50m/min
- Traverse speed:1.6m/min
- Take-up motor: 7.5kw AC motor, 1500rpm;
- Traverse motor power:BWED121-59×17-2.2KW;
- Lifting motor:BLD11-43-2.2KW(2)
- Clamping motor:Y90L-6-B5-1.1KW,960rpm
- Structure: The gantry is made of bending and welding. The two tops
of the reel are driven by two motors via a cycloid reducer to lift
the screw nut. Each apex can be lifted separately or
simultaneously, with mechanical and electrical protection. The
device can be equipped with different specifications of the top
sleeve to meet the installation of different specifications of the
reel; the reel clamping is realized by the motor cycloid reducer,
and the clamping overload protection is provided. The winding motor
is AC frequency conversion, and the gear transmission is carried
out. And the worm gear drive shaft spindle rotates. The
frequency-receiving controller controls the wire-receiving motor,
and the cable adopts a high-speed ratio cycloidal speed reducer,
which is driven by a 1.1KW variable frequency motor and an imported
controller; the cable pitch is set by the cable finder, and the
cable pitch can be set at any time. The size of the cable line
automatically tracks the speed of the take-up line. The whole
machine is equipped with speed, tension and cable adjustment
potentiometer. The positive and reverse jog buttons are equipped
with tension display and cable pitch display. Tension control is
realized by constant torque mode.