Beyde Manufacturing High Speed Flat Steel Wire Shielding And
Armoring Machine 300/72
1. Equipment characteristics
- unit is equipped with a human-machine interface, and various
operating parameters can be displayed and set in real-time, which
is intuitive and convenient.
- The actual rotational speed and traction line speed of each section
of the twisted cage can be visually displayed.
- The meter wheel is equipped with rubber coating and pneumatic
compression device, effectively improving the meter accuracy. It
can be connected to the main control cabinet to set the meter
parking.
- The disconnection position can be accurately displayed on the
display screen of the operation cabinet, making it easy to find.
- 4The disconnection alarm signal is transmitted wirelessly,
effectively avoiding confusion or failure of the transmission line.
- Adopting a cabinet type touch screen control console, it is easy to
operate and has a beautiful form.
- The auxiliary reinforcement of the 5.7 host hinge adopts
rectangular square tubes to avoid the shaking of the single board.
- The new belt type tensioning device adopts high wear-resistant
friction blocks, making adjustment more convenient and has a longer
lifespan.
- The internal cables and air ducts are hidden in the base square
tube to avoid damage and disorder.
- Add reinforcement to the front bracket of the host to increase
stability. The wire mold base is connected to the front bracket of
the host, which has stronger integration and better mechanical
rigidity.
- The front and rear axle heads of the main engine are made of
integrated cast steel parts to avoid cracking caused by welding.
- has increased the area of the main engine brake area to improve
braking performance.
- Surface polishing of traction wheels
2. Main Parameter
Low carbon steel wire | Φ0.5-Φ3.15mm |
Max stranding dia. | Φ45mm |
Rotation speed | 182r/min |
Armoring pitch | 48-860mm |
Max capstan wheel dia. | Φ2000mm |
Max traction line speed | 65.45m/min |
Main stranding motor power | 55kw (AC variable frequency motor) |
Pay-off bobbin size in cage | PN500(customer bobbin drawing) |
Center Pay-off bobbin size | PN1000-PN2000 |
Take-up bobbin size | PN1000-PN2000 |
Machine center high | 1000mm |
3.Operating directon: Equipment operation direction: Right head machine, facing device
operation, left release line, right take-up line
4.Color:
- Rotating parts:RAL2004
- Main body:RAL5015
- Other parts:RAL7035
5.Main parts brand:
5.1 | Bearing brand | (Ha,Wa, Luo.) |
5.2 | Low voltage appliance brand | (Chint) |
5.3 | Brand of main drive motor | (Wuxi Shengli ) |
5.4 | Pneumatic components | (AirTAC) |
5.5 | Frequency conversion controller | (Inovance ) |
5.6 | PLC | (SIEMENS) |
5.7 | Touch screen | (SIEMENS) |
6. Document with machine
6.1 | Use Manual | 1 set |
6.2 | Foundation diagram | 1 set |
6.3 | Overall diagram | 1 set |
6.4 | Electrical drawing | 1 set |
6.5 | air circuit layout | 1 set |