Home Companies Changshu Xinya Machinery Manufacturing Co., Ltd.

1 Ton Yamaha Engine Powered Capstan Winch for cable pulling and hoisting

Active Member

Contact Us

[China]

Address: Yongfu Road, Yetang Town District , Shanghu Town, Changshu, Suzhou, Jiangsu, China (Mainland)

Contact name:Wendy

Changshu Xinya Machinery Manufacturing Co., Ltd.

1 Ton Yamaha Engine Powered Capstan Winch for cable pulling and hoisting

Country/Region	china
City & Province	suzhou jiangsu

Product Details

1 Ton Yamaha Engine Powered Capstan Winch for cable pulling and hoisting

Application

1. It is used for tower erection

2. It is used for pole setting

3. Stringing wire in electrical power line construction.

Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope.

Structure

1. roller wheel

2. transmission

3. diesel or gasoline engine

4. the base frame composition

5. Motor cutter grinding works: winch is used to pull the slot groove rope connected directly to gasoline or diesel engine, electric motor as the driving force, after shifting box of gear to achieve the required speed, the machine is located on steel, ro. bust and easy to move.

Yamaha Engine

Features

Small power yamaha engine
low vibration,low noise

Easy to operate and high safty

Precise Machining Technique

Long Life of the Machine

Delicate and Beautiful Appearance Design

Broader Applicable Scope

Good quality and less malfunction

Specifications

Fuel:gasoline

Stroke:4 stroke

Cylinder: Single Cylinder

Cold Style: Air-cooled

Start: Kick Start

Displacement: 250cc

Starting System: Recoil/Electric Key start

Transmission and Brake System

1. Belt driven transmission

2. Automatic clamp brake and clutch brake transmission interlock two brakes are braking action in positive and negative directions.

Maintenance and safe use

1. Engine use and maintenance, according to the machine instructions.
2. Lifting shall not exceed in line with use.
Lubricating oil surface must be kept within 1/4

3. gearbox, before using the machineoutside the bearing should add oil.
4. Automatic burning cars and interlock brakes, should always pay attention to the wear of the friction plate, the automatic braking gear and back tighten loose gap of 0.5mm, if the gap is greater than 1.5 mm, you must replace the friction plate, or likely to cause accidents.
5. Automatic brake load the gearbox, automatic normal lifting, due to the reverse gearis stuck, there is no "beep beep" sound when the back loose.
6. The bearing support frame is anchored on both sides of the reel anchor point, it can not be used as an anchor point to another location.
7. After the long-distance transport aircraft, before use, must be a detailed examination of the various components fastening screws loose, ministries parts is stagnant leak.Gearbox ZL4 aluminum body with screws on it should not be too tight and unnecessarydisassembly, but can not use a hammer.

Technical Data

Model NO.	Engine	Gear	Pulling Speed(m/min)	Rated Pulling Force(Ton)	Weight(Kg)
JJM1-Q	Yamaha engine 4 HP	(Slow)	10.0	0.8	36
		(Fast)	15.0	0.6
		Reverse	12.0	No Lifting!
	Electric motor	(Slow)	10.0	0.8	48
		(Fast)	15.0	0.6
		Reverse	12.0	No Lifting!