Active Member
|
[China]
Address: Yongfu Road, Yetang Town District , Shanghu Town, Changshu, Suzhou, Jiangsu, China (Mainland)
Contact name:Wendy
Changshu Xinya Machinery Manufacturing Co., Ltd. |
|
|
5 Ton Honda Gas Engine Powered Winch Cable Pulling Tools With 300M Wire Rope
Brief introduction of engine powered winch
Electric winch is powered by motor. The power is input into the third level enclosed gear reduction box by flexible coupling to lift weight or pull by wire rope and to drive the drum from Low speed shaft end steel key. We use common motor when we need to lift or pull small weight. Conversely, lifting motor is adapted. The common motor can start directly. But the lifting motor starts slowly and stably by cam switch and resistanceadjusting.The brake system adopts electromagneticbraking or hydraulic braking.
Work principle engine powered winch
The winch transforms electric energy into mechanical energy through the motor1, which is rotor of the motor moves, outputs, and then through the brake 2, and the reducer 3 reduces speed to rotate the reel 4. The reel winds the wire rope and passes through pulley block to make the hook lift the load Q, and transforms mechanical energy into mechanical work finishing transportation, load and unload of heavy weights.
Features of engine powered winch
1. High versatility
2. Compactstructure
3. Smallvolume, lightweight, convenience in using and transferring
4. Driving stably
5. Very light noise
6. With big drum rope capacity to make you a wide range of choice for the lifting height or pulling length.
7. Adjustable lifting or pulling speed for different usage environment.
8. This kind of electric wire rope winch can be applied to the lifting or pulling operating in construction water conservancy, forestry, mining and quay places etc…
Technical Data
| Model Type | Gear | Pulling Force(KN) | Pulling Speed(m/min) | Power | Weight(KG) |
| JJM5Q | Slow | 50 | 5 | HONDA GASOLINE GX390 13HP | 292 |
| Fast | 30 | 11 | |||
| Reverse | - | 3.2 |
FAQ:
1. Is your product customized?
Yes, because the working condition are different, all our products
are customized depending on detail requirement! So if you give us
more information about the lift capacity, span, lift height, power
source and other specials, we will give you a very quick and
accurate quotation.
2. What’s the information should I provide when inquiry?
The more information you provide, the accurate solution we can
prepare for you! The information such as the lift capacity, span,
lift height, power source or other specials you give us will be
more appreciated.
3. How many operating methods for my selection?
The standard operating methods we provide is pendent controller
with push buttons. Meanwhile, we can also provide the remote
control with push buttons and the cabin (space capsule seat)
control with joystick. You can choose any of them, just tell us!
4. What’s the max lifting capacity of the crane?
The max Lifting capacity of our standard crane are up to 450 ton.
If this can’t satisfy your working requirement. Please contact us
for special customized.
5. The space of my workshop is limited, can the crane ok for mine?
For low headroom workshop, we have the Special products. The detail
dimension please consult our professional engineer.
6. Can the crane work in hazardous environment?
This type product is just for application in general manufacturing
workshop.For hazardous environment, please consult our professional
sales manager.
7. Do your side can provide lift tools?
Yes, we can provide any kinds of lift tools such as lift sling
belt, lift clamp, grab, magnet or other specials as your
requirement!
Other Cable Laying Tools we produced:
