Home Companies Changshu Xinya Machinery Manufacturing Co., Ltd.

Light Weight JJM1Q YAMAHA Cable Pulling Winch 1 Ton , Gasoline Powered Winch

Active Member

Contact Us

[China]

Address: Yongfu Road, Yetang Town District , Shanghu Town, Changshu, Suzhou, Jiangsu, China (Mainland)

Contact name:Wendy

Changshu Xinya Machinery Manufacturing Co., Ltd.

Light Weight JJM1Q YAMAHA Cable Pulling Winch 1 Ton , Gasoline Powered Winch

Country/Region	china
City & Province	suzhou jiangsu

Product Details

Light Weight JJM1Q YAMAHA Gasoline Cable Pulling Winch 1 Ton

Application

1. It is used for tower erection

2. It is used for pole setting

3. Stringing wire in electrical power line construction.

Winch can be modified as per requirement,

such as changing curve capstan into straight even cylindrical shape and coming with steel rope.

Structure
1. roller wheel

2. transmission

3. diesel or gasoline engine

4. the base frame composition

5. Motor cutter grinding works:

winch is used to pull the slot groove rope connected directly to gasoline or diesel engine, electric motor as the driving force,

after shifting box of gear to achieve the required speed, the machine is located on steel, ro. bust and easy to move.

Transmission and Brake System

1. Belt driven transmission

2. Automatic clamp brake

and clutch brake transmission interlock two brakes are braking action in positive and negative directions.

Maintenance and safe use

1. Engine use and maintenance, according to the machine instructions.
2. Lifting shall not exceed in line with use.
Lubricating oil surface must be kept within 1/4

3. gearbox, before using the machineoutside the bearing should add oil.
4. Automatic burning cars and interlock brakes, should always pay attention to the wear of the friction plate, the automatic braking gear and back tighten loose gap of 0.5mm, if the gap is greater than 1.5 mm, you must replace the friction plate, or likely to cause accidents.
5. Automatic brake load the gearbox, automatic normal lifting, due to the reverse gearis stuck, there is no "beep beep" sound when the back loose.
6. The bearing support frame is anchored on both sides of the reel anchor point, it can not be used as an anchor point to another location.
7. After the long-distance transport aircraft, before use, must be a detailed examination of the various components fastening screws loose, ministries parts is stagnant leak.Gearbox ZL4 aluminum body with screws on it should not be too tight and unnecessarydisassembly, but can not use a hammer.

Technical Data

Model NO.	Engine	Gear	Pulling Speed(m/min)	Rated Pulling Force(Ton)	Weight(Kg)
JJM1-Q	Yamaha engine 4 HP	(Slow)	10.0	0.8	36
		(Fast)	15.0	0.6
		Reverse	12.0	No Lifting!
	Electric motor	(Slow)	10.0	0.8	48
		(Fast)	15.0	0.6
		Reverse	12.0	No Lifting!