Model | WPM03SD-H | Function | Wire Measuring,Both Ends Stripping,Both Ends Half Strip,Single End
Crimping,Single End Soldering,Single End Twisting,Single End
Flux,Full and/or Half Stripping with Programable Strip Length
,Programable Blade Depth,Programable Crimping Position,Automatic
Crimp Height Adjustment (Servo press),Flux Volume, Panel Setting of
Solder Volume,Elimination of Solder Oxidation Membrane,Terminal
Transferring Soft Clamp,Compulsion Ventilation of Solder and Flux
Unit | Capacity(*1) | 1.2sec/pc.(Cutting length 100mm soldering side:strip length 3mm in
case of pre soldering length 1mm) | Wire size | 0.08-1.25mm2(AWG#28-#16)O.D.0.4 -3.4mm | Cutting length(*2) | 25-600mm(2,000mm) | Cutting length | Cutting Length below 100mm :Variation 0.5mm+(Set Length ×0.002) Cutting Length over 100mm :Variation 1.0mm+(Set Length ×0.002) | Stripping length | No.1:1.0-10.0mm No.2:1.0-25.0mm(Soldering Length :1-25mm,Twisting
Length :3-25mm) | Cut Depth | Max.Adjustment 3mm 150step(1step=0.02mm) Pull back | Press Capacity | 24,500N(equivalent to 2.5ton)Servo Press With Inching SW | Detector | Air pressure down,Wire presence,Wire overload,Stripping error,Crimp
error,Terminal presence,Terminal overload,Wire parameter error | Power source | 3 phase AC200V/220V(within ±10 %)50/60Hz 10A | Compressed air | 0.5MPa(5kgf/cm2),Apporox.180NL/min(Use clean dry air) | Dimension, Mass | 1,250W ×800D×1,480H(mm),Apporox.590kg | Option | Wire Reel stand(WRS18,WRS20DR),Paper winding device,Wire joint,3
colors indication light,Belt chute, Simple liquid face detector of
solder and flux,Crimp force device,Application conversion KIT for
other brand |
|