|
[China]
Trade Verify
Address: 2F,Building7,Baolong Center,No.689,Xiwang Road,Jiading District,Shanghai,201800,China
Contact name:Joy Wang
TOBO STEEL GROUP CHINA |
|
Verified Suppliers
|
|
|
ASTM A312 / A213 Cold Drawn Seamless Pipe, TP304 / 304L Stainless
Steel Tubing
Typical 304 Stainless Steel | ||||||||||
Type 304 stainless steel is the most common austenitic
chromium-nickel | ||||||||||
| ||||||||||
Typical 304 Chemical Composition /% | ||||||||||
Material | C | Si | Mn | P | S | Ni | Cr | Mo | N | Ti |
304 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.045 | ≤0.03 | 8.0-10.0 | 18~20.0 | / | / | / |
| ||||||||||
Typical 304 Mechanical property | ||||||||||
Material | Yield | Tensile | Elongation | Hardness Test | ||||||
304 | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | |||||
Stainless Steel Seamless Pipe:
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test
or the hydrostatic test, the pipe of test to be used shall be at
the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND
INCLUDING nps 8 are available in a length up to 24ft with the
permitted range of 15 to 24 ft. Short length are acceptable and the
number and min, length shall be agreed upon between mfg and
purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish,
Removal of imperfections by grinding is permitted, provided the W.T
are not decreased to the less than the permitted in Section 9 of
Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo+Standard+SIZE+Heat No.+Lot
No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by
Anti-rust steel strip, The outside of the bundle is plastic woven
bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.
APPLICATIONS FIELD :
ndustry | Applications | Industry | Applications |
Chemical | Heat Exchanger,Boiler | Sugar | Evaporators, Condensers, Driers |
Petrochemicals | Condensers | Automobiles | Muffler Tubes Hydraulic Tubing |
Refineries | General Piping | Construction | Architectural Furniture |
Fertilizers | Pressure Vessels | Pharmaceuticals, Dairy, Food & Beverages | Machineries Process Piping |
Paper & Pulp | Industrial Equipments | Submersible Pumps | Pump Casing Applications |
Engineering | Machineries Instrumentation Tubing |
|
|
Specifications:
Mechanical Property | Material Item | 304 | 304L | 304 | 316L | Top Technology |
Tensile Strength | ≥520 | ≥485 | ≥520 | ≥485 | ||
Yield Strength | ≥205 | ≥170 | ≥205 | ≥170 | ||
Extension | ≥35% | ≥35% | ≥35% | ≥35% | ||
Hardness (HV) | <90 | <90 | <90 | <90 |
