Home Companies Ivy Machinery (Nanjing) Co., Ltd.

NR300 Automatic Bus Door , Long / Short Shaft Bus Door parts For Coach Bus

Ivy Machinery (Nanjing) Co., Ltd.
Active Member

Contact Us

[China] country

Address: 2# Dahua Road Zhujiang Industrial Park, Pukou District, Nanjing City,China .Email: warrensea@126.com

Contact name:

Inquir Now

Ivy Machinery (Nanjing) Co., Ltd.

NR300 Automatic Bus Door , Long / Short Shaft Bus Door parts For Coach Bus

Country/Region china
City & Province nanjing jiangsu
InquireNow

Product Details

Product Name: NR300 Long and Short shaft pneumatic automatic bus door system for coach buses

 

1. Introduction:

Application: tour bus,intercity bus,coach.Van, Minibus

 

System Component: Rotary actuator, Shaft assembly and Door panel assembly.

 

1) The actuator provides rotary motion and “Lift-to-latch” feature.

A double acting cylinder drives a splined shaft through a helical ball cage to provide rotary motion. When the door reaches the closed position, the actuator lifts the door shaft and door panel approximately 10mm,enabling latches on the door panel to engage mating wedges on the door jambs.The door panel is held closed as long as air pressure is applied the actuator.

2) The shaft assembly is designed for easy installation and maintenance.

3) The door panel can be specially designed to match with full bus design. It is made of aluminum alloy, which has the attributes of light weight, high strength and long life.

 

Operating principle:

1) Auto operation :When “open” or “close” switch is pushed, the 5-way 2-position solenoid valve will be actuated, which drives linear pneumatic cylinder move up and down. Through splined shaft,the linear motion transfer to rotation, which cause the door open or close.

2) Emergency release: In case of emergency, rotate the emergency valve 90 degree to release the air pressure. The door panel will drop as soon as air pressure in the cylinder is low. Push the door panel manually to open the door

3) Sensitive edge: In case the passenger or other items are clamped during the vehicle door closing, the door panel will be lifted and actuate the limit switch to reverse the motion to open the door.

 

Main Parameter:

Maximum torque in locked position (@90 psi)122 ft-lbs
Recommended door shaft rotation90 degree
Operating temperature-40°C to 80°C
Operating pressure90-125 psi
Minimum Life cycle500,000
Locking mechanismLocal wedge lock
Door closing time3-5 seconds
Door opening time3-5 seconds

 

Ivy Machinery Main Products: 

 

SG300 & ESG300 slide-glide door system for city bus,

SG400 & ESG400 BRT slide-glide door system for city bus or low floor BRT Vehicles,

BP300 electrical bridge-plate ramp for low floor bus,

ER300 electrical rotary door system for mini-bus,

NR300 pneumatic rotary door system for coach bus,

ESW300 electrical swing door system for school bus,

NOSP300 pneumatic outside sliding plug door system for high end bus,

PF300 platform safety door for BRT bus stations.

 

Ivy’s main rail products :

EOSP300 electrical outside sliding plug door system for Metros or LRV,

EOSP330 electrical plug door system for low floor trams,

EIS300 electrical inside sliding door for Metros or LRV,

EOS300 electrical outside sliding door for Metros or LRV,

BP200 manual bridge-plate for low floor trams,

PF400 platform door system for rail stations.

 

Hot Products

Product Name : Single and Double leaf Pneumatic Bus Door System With Sensitive Edge 1. Introduction: ...
Product Name : Top mounted Outswing Pneumatic bus door system for airport shuttle bus 1. Introductio...
Product Name : Pneumatic Inswing City Bus Passenger Door System With Sensitive Edge 1. Introduction: ...
Product Name : Pneumatic Inswing City Bus Passenger Door System With Sensitive Edge 1. Introduction: ...
Product Name:Left and Right Open Direction Pneumatic Bus Door Mechanism For Yutong Coach Bues 1. ...
Product Name: Sensitive Edge Pneumatic inswing Sliding Bus Door System For YUTONG bus Introduction: ...