|
[China]
Trade Verify
Address: NO 123 Suzhou Dadao East Road Suzhou Jiangsu China
Contact name:Tina
Suzhou Kiande Electric Co.,Ltd. |
|
Verified Suppliers
|
|
|
M12 Double Head Bolt with Nut Grade 8.8 for Sandwich Busbar Trunking System
Features
Installed in joint for insulation
Material: 8.8 grade high tensile steel
Size and color can be customized
| Model | Class | Size of Square Nut | Thread Length | Torque Force | Color |
| M12*115 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*120 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*125 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*130 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*140 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*165 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
Installation Guidence of Busduct Joint
Step1:dentify the correct joint stack (either 4W or 5W) and its
phase orientation before Busduct joint pack installation
Step2: Align and connect both busduct terminal with joint stack connector.
Step3:Joint stack stopper acts a guideline to ensure a full contact surface of the overlapping conductors.
Step4: Tighten the double headed bolt by using socket wrench untile the outer head shear off.
Step5:Place joint pack covers on both sides of the busduct joint section and tighten all the bolts and nuts with socket wrench.
Busbar Trunking System is the is a system of distributing electric power using copper or aluminium busbar with suitable enclosures and good amount of protection to prevent the cables from getting damaged due to foreign bodies. ... The system of cooling is much better than traditional cabling system.
