Suzhou Kiande Electric Co.,Ltd. |
Verified Suppliers
|
|
8mm 9mm One Time Molding Hydraulic Busduct Production Machine
Principle characteristics
1. Using compressed air as the power source, it is highly efficient
and easy to operate, with simple structure and minimal maintenance.
2. There is no noise generated by the hydraulic system during
standby, which can save power consumption and reduce production
costs.
3. The height, speed, stroke, pressure and stamping time can be
adjusted arbitrarily according to different products or molds.
4. Equipped with anti-rotation guide rods and guide plates, with
high precision, which can adapt to high-speed precision blanking.
5. Two-hand control or foot pedaling can be selected. Ensure the
personal safety of operators.
6. Using a microcomputer control system, the mode can be manual,
semi-automatic and fully automatic. Heating molds, temperature
control and pressure sensors can be added. The structure is simple,
and pneumatic technology is adopted to realize that one air
compressor can supply multiple pneumatic punching machines at the
same time, which is more energy-efficient than electric punching
machines. Reduce power consumption. The operation is simple, the
safety type is high, the foot switch is used to control the
solenoid valve, the structure is simple, the failure rate is low,
and the production efficiency is improved.
Equipment Data On Digital Copper Bar Punching Machine
No. | Parameters |
Model | KD-YYJ-40(50)T |
Bending Power Type | Hydraulic and pneumatic hybrid |
Pressure | 40T or 50T, Max. 80T |
Die | Fast die change |
Workplace Size | L450mm*W340mm |
Control Mode | Digital control |
Air Source | 0.6MPa |
Power | 220~230VAC 50~60Hz 80W |
Equipment Dimension | L680mm* W580mm* H2600mm |
Features :
Power consumption is only: 10W, rated output force: 120KN, good
stability, the output force change is only ±20Kg force within the
20mm boost stroke range, the equipment has high working efficiency,
five to ten faster than ordinary hydraulic presses Times. Take the
configuration of this model as an example, it can complete about
forty cycles per minute. And the speed can be easily adjusted, the
pressure can be easily adjusted, there is no requirement for the
height of the mold, at any position, at any position during the
pressing process, the workpiece is sensed and the pressure is
started, and because of the unique soft in place, the workpiece
Without any damage to the mold, it is immediately converted into a
stable output of static pressure.
There are many types of equipment control systems, which are adapted to the needs of different users. They can have relay control circuits, PLC control circuits, and single-chip control circuits, which can realize man-machine dialogue, easy operation, and good safety performance. They are equipped with two-hand control methods. Infrared light curtain protection can be added to make the safety performance better.
The pressure can be displayed in real time and the pressure value can be displayed accurately. In addition, pressure control can be achieved, that is, after the required output pressure is set, the device can output the set force value, and the device will automatically return after reaching this force.
In addition, we can design corresponding actions according to customer requirements.