Impact Resistant LED Street Solar Light In Home Stay Resort Hotel Outdoor

solar tianyi light/LED/3200LM/5400LM/3.2V/50 /use in Home-stay, resort, and hotel outdoor lighting; Island lighting

I.Gerenal Introduction

1.Impact-Resistant Mono-crystalline Solar Panel

2.Die-casting steel frame

3.MPPT charge controller

4.Solar energy, low-carbon, clean and cheap, no electricity cost

5.MPPT controller, intelligent battery management, prolong battery lifetime

6.A-level solar panels, conversion rate> 15%

7.High efficacy led lamps, up to 180 lm/w

II.Specifications

III. Q&A

1.why do LEDS have a higher initial cost than conventional light sources?

LEDs are made of electronic components that need to be packaged together to offer long lasting efficient light sources to the end user. Apart from the LED chip itself which has sapphire and gallium in the semiconductor, the process of packaging with materials like ceramic, rare earth phosphors, silicone, solder and gold wire add to the overall cost. White LEDs require further tests for calibration and standardization.

2. how do I know that a light fitting safe?

In Europe, every light fitting must have a CE label. This tells you that the seller claims that the fitting conforms to all the relevant European safety standards. The most important of these is EN 60598 which covers electrical, thermal and mechanical safety.

3.what are the factors that effect the lifespan of the LEDs?

The thermal management of the LEDs. If LEDs come on a standalone chip, appropriate heat sinks have to be designed to prevent premature failure of LEDs.

The electrical stress: Running LEDs at currents higher than specified make the LED run hot. This can happen with wrongly matched drivers. For example, if the driver produces 700mA but the LED needs 350mA, this will put stress on LED and reduce its lifespan.

Higher ambient temperatures than the ones that the LED is rated for will reduce its expected life.

4.why are LEDs considered green technology?

LEDs are more efficient than most other light sources, so they usually consume less energy for a given task or at a spesific light output. Also, they do not contain hazardous materials such as toxic mercury. Moreover, LEDs have a longer lifespan and hence reduce the frequency of disposal of lamps.