Home Companies Chongqing Haodong Technology Co., Ltd.

Hanging Heavy Duty Drag Chain Roller Overhead Chain Conveyor Systems

Active Member

Contact Us

[China]

Address: 8-10, Building 8, 48 Danzishi Tenglong Avenue, Tushan Town, Nanan District, Chongqing

Contact name:Tan

Chongqing Haodong Technology Co., Ltd.

Hanging Heavy Duty Drag Chain Roller Overhead Chain Conveyor Systems

Country/Region	china
City & Province	chongqing chongqing
Categories	Door & Window Handles

Product Details

China Chain Drag Hanging Conveyor Chain Line Overhead Chain Conveyor System And Parts

ITEM/MODEL	UH-5075-S	UH-5075-HH	UH-5075-HV	UH-5075-HA
Suspension spacing	150	150	150	150
Chain's weight	4.2	4.58	4.83	5.3
Single-span weight	≤35	≤40	≤45	≤50
Chain's allowable pull force	≤3000	≤3000	≤3000	≤3000
Chain's catastrophic pull force	≥5500	≥5500	≥5500	≥5500
Working temperature	≥250	≥300	≥300	≥400

Product Introduction

Product specification

Advantage

* Low noise

* Less power consumption

* Stable operate performance

* User-friendly and safe use

* Excellent extensity

* Make full use of space

Application

Other Accessories

The complete chain conveyor line components: chain, straight rail, elbow, lifting rail, transmission device, tensioning device, flange, inspection rail, spreader, tanker, control box. The inspection rails, spreaders, fuel dispensers, and control boxes can be processed by the customer.

1. Bush Track: Can be used for straight track connecting place within the furnace, take-up device can be used too. Straight track can stretch or shrink freely with the bushing so that shape can’t be changed under hot or cold conditions.

2. Vertical Track (Up track Down track): Used on the rising or falling areas where the conveying chains pass, with standard diameter 1.2M x 180°. Also can be cut based on any necessary angles of any installing conditions. But the angle should not more than 45°,

and the distance between two adjacent hangers should be considered.

3. Horizontal Track: Used for conveying chain pass horizontal area. Standard diameter Φ0.8m~Φ2.0m x 180°, it can be cut based on any necessary angles for specific installing conditions. Also horizontal bending head can be customized by special requirements.

4. Sprocket DriverDN-5T: Motor speed reduction unit output momentum to sprocket wheel, chains and connecting shackle, so as to drive the chains to move. Simple structure, easy installation and convenient operation features are suitable for short length conveyors.

5. Driver: Crawler type, Cow back type, Limit load type transmission seat.

6. Take-up device: Heavy vertical type, Spring type type.

7. Cross Type Disk Hanger: Cross type dick performs nearly the same function with cross shaped hanger, the only difference is that a disk is added on the top of the hook. Purpose: receiving grease stains from the track and prevent the work pieces become dirty.

Sprocket Wheel Hanger: When the chain works, gear wheel work with the gear tracks located on particular position, then the hanging work pieces can be processed continually.

Y Type Hanger: Connect to chain directly, convenient and easy to install. The bottom of the suspender is connected with cross shape suspender or cross shape round suspender.

8. Lubrication tool: Full automatic filling machine, automatic oil feeder, manual oil feeder and high temperature chain oil.