JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
|
D100mm CuSn8 Bronze Thrust Washers for Construction Machinery are specifically designed components that are utilized in various construction machinery applications. Made from CuSn8 bronze alloy, these thrust washers offer exceptional durability, wear resistance, and corrosion resistance, ensuring reliable performance in demanding construction environments.
The diameter of these thrust washers is 100mm (D100mm), making them suitable for a wide range of machinery and equipment sizes. The CuSn8 bronze material provides high strength and good ductility, allowing the washers to withstand significant loads and impacts without deformation or damage.
The thrust washers serve as an interface between moving parts, reducing friction and wear. They help distribute the load evenly across the contact surfaces, minimizing the chances of damage or failure. In construction machinery, these thrust washers are often used in gears, bearings, and other rotating or sliding components.
The CuSn8 bronze alloy also offers excellent corrosion resistance, making the thrust washers suitable for outdoor and wet environments. This material can withstand exposure to moisture, chemicals, and other contaminants without degrading or losing its performance.
Overall, D100mm CuSn8 Bronze Thrust Washers for Construction Machinery are an essential component for ensuring smooth, reliable operation of various construction equipment. Their durability, wear resistance, and corrosion resistance make them a trusted choice for demanding applications.
Bronze thrust washers are made from tape, tube and bar. In particular, strip cut washers are very economical in large quantities. You can order strip bronze thrust washers as well as tubes and rods in almost any size and material. The design can be customized.
The bronze thrust washer is wrapped with a bronze strip. The material consists of a specific formulation with a high specific weight and can be provided with spherical or diamond-shaped depressions or oil grooves on its surface, depending on the customer's requirements. Bronze thrust washer has high load capacity and is long. Bronze thrust washer can serve as a replacement for traditional bronze bushings for low cost and performance of anti-high compact bushings. Bronze thrust washer is widely used in hoists, construction machinery, automobiles, tractors, trucks, machine tools, and some mining companies.
Bronze thrust washers are made completely of bronze. They are particularly suitable for applications, which must be re-lubricated due to dirty environments.
The sliding surface is provided with lubrication pockets, which contribute to the enhanced lubrication performance.
Base marerial | CuSn8P0.3 or CuSn6.5P0.1 | ||
Hardness | HB90~120 | Temperature limit | -80℃~200℃ |
Load capacity | 75N/mm² | Speed limit | 2.5m/s |
FB090 wrapped bronze bearing, flanged bushings, thrust washers, this product uses a specially formulated high-density copper alloy strip as the base body, which is rolled (can be made into bearing bushes, flanged bushings, thrust washers) Gaskets and bowls, etc.), the surface can be rolled with diamond-shaped or hemispherical oil pockets and grooves according to user requirements. The product has X points such as high density, high bearing pressure, good wear resistance, and long service life. It can replace the traditional cast copper sleeve, which can reduce the mechanical volume and reduce the cost. Products are widely used in lifting machinery, construction machinery, automobiles, tractor industries, machine tool industry and mining machinery.
Data | Grade | Wrapped bronze bearing 090 | Wrapped bronze bearing 092 | Wrapped bronze bearing 09G |
Material | CuSn8P | CuSn8P | CuSn8P+Graphite | |
Typicai applicaton | Products are suitable for lifting machinery, construction machinery, mining machinery, agricultural machinery, forest machinery and so on | Products are widely used in agricultural machinery, construction machinery, construction machinery and so on. | It has the advantages of low friction coefficient, good wear resistance and so on, and can work under the condition of no oil or little oil. The products are widely used in starting motors and hoist, construction machinery, cars, trucks, tractors and so on. | |
Densityg/cm3 | 8.8 | 8.8 | 8.8 | |
Max. dynamic loadN/mm2 | 100 | 120 | 100 | |
Max. linear speed (grease lubrication) m/s | 2 | 2.5 | 2.5 | |
Max. PV value (grease lubrication)N/mm2·m/s | 2.8 | 2.8 | 2.8 | |
Tensile strength N/mm2 | >460 | >460 | >460 | |
Yield Strength N/mm2 | >280 | >280 | >280 | |
HB | 90~150 | 90~150 | 90~150 | |
Matching shaft | HRC | ≥50 | ≥50 | ≥50 |
Roughness | 0.4~1.0 | 0.4~1.0 | 0.4~1.0 | |
proper temperature ℃ | -40~150 | -40~150 | -40~150 | |
Friction coefficient | 0.06~0.15 | 0.06~0.15 | 0.03~0.1 | |
Heat conductivity coefficient W/m·K | 58 | 58 | 58 | |
Coefficient of linear expansion (axial) | 18.5×10-6/K | 18.5×10-6/K | 18.5×10-6/K |
Bronze Thrust washers can be made from Wieland strips. In particular, washers punched out of strip material are very economical in large quantities.
Bronze Thrust washers can also be made from Wieland tubes and rods. It is possible to use almost all Wieland materials for the production of thrust washers.