VIIPLUS INTERNATIONAL |
|
Copper Steel backed & Bronze powder with POM Bushing | |
SLIDING BUSHING | 30 X 34 X 20 |
SLIDING BUSHING | 35 X 39 X 30 |
SLIDING BUSHING | 40 X 44 X 20 |
SLIDING BUSHING | 40 X 44 X 30 |
SLIDING BUSHING | 45 X 50 X 40 |
SLIDING BUSHING | 50 X 55 X 40 |
SLIDING BUSHING | 55 X 60 X 40 |
SLIDING BUSHING | 60 X 65 X 40 |
These DX Bush Bearings are widely used in the Machinery Industry. (Inside Diameter x Outside Diameter x Length).
We also dealers for other types of sliding bearings including:
The sf-2 steel-backed polyformaldehyde-pom oil storage pit pre-lubricated bearing (copper-plated) (known as DX bearing abroad) is based on steel plate matrix, sintered spherical bronze powder in the middle, surface rolled modified polyformaldehyde-pom (POM), and contains oil storage pit.
It is suitable for the room temperature condition, low speed medium load place, replace the traditional copper sleeve not only reduces the cost but also prolongs the service life.When used on rolling mill, it can save refueling frequency and simplify the replacement procedure.
Base material: POM+ bronze powder + steel back + electroplating (copper/tin)
Ultimate dynamic load: 140N/mm
Maximum PV value: grease lubrication: 2.8n /mm. M /s
Friction coefficient: 0.05~0.25
Maximum load P: static: 250N/mm dynamic: 150N/mm
Maximum operating temperature: 130℃
Maximum sliding speed: grease lubrication :2.5m/s
Thermal conductivity: < 42W/m.k
Processing: standard | to figure processing
Available form: bushing sliding block sliding plate bearing bush
shaft | housing | ID | OD | Wall thickness | Oil hole | L 0 -0.40 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
h8 | H7 | d | D | T | h- | 10 | 12 | 15 | 20 | 25 | 30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | 0 -0.022 | 12 | +0.018 0 | 10 | 12 | 0.980 0.955 | 4 | 1010 | 1012 | 1015 | 1020 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0 -0.027 | 14 | " | 12 | 14 | " | " | 1210 | 1212 | 1215 | 1220 | 1225 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14 | " | 16 | " | 14 | 16 | " | " | 1415 | 1420 | 1425 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
15 | " | 17 | " | 15 | 17 | " | " | 1510 | 1512 | 1515 | 1525 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | " | 18 | " | 16 | 18 | " | " | 1615 | 1620 | 1625 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | " | 20 | +0.021 0 | 18 | 20 | " | " | 1815 | 1820 | 1825 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0 -0.033 | 23 | " | 20 | 23 | 1.475 1.445 | " | 2015 | 2020 | 2025 | 2030 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
22 | " | 25 | " | 22 | 25 | " | 6 | 2215 | 2220 | 2225 | 2230 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
24 | " | 27 | " | 24 | 27 | " | " | 2415 | 2420 | 2425 | 2430 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | " | 28 | " | 25 | 28 | " | " | 2515 | 2520 | 2525 | 2530 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
28 | " | 32 | +0.025 0 | 28 | 32 | 1.970 1.935 | " | 2820 | 2825 | 2830 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 | " | 34 | " | 30 | 34 | " | 3020 | 3030 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
32 | 0 -0.039 | 36 | " | 32 | 36 | " | " | 3220 | 3230 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
35 | " | 39 | " | 35 | 39 | " | " | 3520 | 3530 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
36 | " | 40 | " | 36 | 40 | " | " | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
37 | " | 41 | " | 37 | 41 | " | " | 3720 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
40 | " | 44 | " | 40 | 44 | " | 8 | 4020 | 4030 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
45 | " | 50 | " | 45 | 50 | 2.460 2.415 | " | 4520 | 4530 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
50 | " | 55 | +0.030 0 | 50 | 55 | " | " | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
55 | 0 -0.046 | 60 | " | 55 | 60 | " | " | 5520 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
60 | " | 65 | " | 60 | 65 | " | " |
1, with high mechanical strength and rigidity;
2. The Maximum fatigue strength;
3. Good environmental resistance and organic solvent resistance;
Strong resistance to sustained impact;
5. Widely used temperature ranges from -40℃ to 120℃.
6. Good electrical properties.
7. Good recovery.8, with their own lubrication, good wear to
hold;9. Excellent dime
Melting point of 175 ° C
Density 1.42 g/mL at 25 °C
Flash point 158 °F storage condition 2-8°C
Performance indicators | Date | |
Maximum load P | Static load | 250N/mm² |
Dynamic load | 150N/mm² | |
highest line speed V | Grease lubrication | 2.5m/s |
High PV value | Grease lubrication | 3.6N/mm²・m/s |
Coefficient of friction | Grease lubrication | 0.05~0.25 |
The use of temperature | -40℃~+130℃ | |
Coefficient of thermal conductivity | 4W/m・K | |
Coefficient of thermal expansion | 12×10-6/K |
Click here for PDF for more product information