VIIPLUS INTERNATIONAL |
|
Wrapped bronze bearings, which are equivalent to Wieland bearings, are a type of high-performance bearing solution offering exceptional durability and reliability. These bearings feature a wrapped bronze construction that provides superior wear resistance and load-bearing capabilities.
Similar to Wieland bearings, wrapped bronze bearings are designed to operate in a variety of demanding environments and conditions. They excel in applications where high loads, high speeds, or both are present, making them a popular choice for industrial machinery, automotive components, and other heavy-duty applications.
The wrapped bronze construction also ensures smooth and quiet operation, reducing friction and vibration. This not only improves the overall performance of the equipment but also extends the service life of the bearings themselves.
In summary, wrapped bronze bearings, comparable to Wieland bearings, are a robust and reliable choice for any application requiring high-performance bearing solutions. Their durability, wear resistance, and load-bearing capabilities make them a standout option for a wide range of industries and applications.
Wrapped Bronze Bearings, Wieland Bearing Equivalent
Wrapped sliding bearing
Our growing line of wrapped sliding bearing products is designed to
meet our customers’ evolving needs everywhere we do business.
A wide bushing type to meet your needs.
Bushings, thrust washers and strips
Next-Level Performance
Consistent. Proven. Self-lubricating Quality.
A wide bushing type to meet your needs.
Wrapped bronze bushings Excellent in dirty environments due to lubrication pockets, Select the right bronze bushing for the application
1.Diamond-shaped lubricant reservoirs, bushings have diamond-shaped lubrication pockets on the ID, covering about 25% of the surface.
2.Wrapped bronze bushing, large lubrication depots lubrication holes reservoirs
Wrapped bronze bushings type are available with straight and flange bushings
Material
Wrapped bronze bushings are made
entirely of bronze, CuSn8 The bushings are produced from bronze strips sheet materials with a max. thickness of 2.5mm.
bronze bushing material alternative CuSn6P available
092 bronze bearing, is a bronze material as the matrix, processing and uniform and orderly oil injection hole, the rolling into a thin wall bearing, lubricating grease injection after assembly, configuration end face seal and use again. The bearing has a large amount of remaining oil and the advantages of small volume, easy installation, design and can replace copper set to use, can greatly reduce the cost. Has the Wrapped bronze bushing has been used in conveyor, elevator, roll machine, leveling machine, etc in the occasion of load and low speed.
Bronze Bearing Forms Available in Standard Dimensions
wrapped bronze bushings are particu-larly well suited for
applications where high levels of contamination make relubrication necessary. The sliding surface of an wrapped bronze bushing contains diamond
shaped pockets that must initially be filled
with grease. The pockets act as reservoirs to progressively release
lubricant during operation. Offers a full range of both straight
and flanged wrapped bronze bushings. Straight bushings are
manufactured to dimensions in accordance with ISO 9001.
Wrapped bronze bushings are made entirely of bronze, CuSn8. The bushings are produced from strips which are then wrapped and calibrated.
Wrapped Bronze Bearings'Technical parameters
Performance indipcators | Data | |
Maximum load | Static load | 120N/mm² |
Dynamic load | 40N/mm² | |
Maximum linear velocity | 2.5m/s | |
High PV value | 2.8N/mm²・m/s | |
The coefficient of friction(μ) | 0.08~0.25 | |
The use of temperature | -100℃~+200℃ | |
Coefficient of thermal conductivity | 60W/m・K | |
Coefficient of thermal expansion | 15×-6/K |
Whether grease or oil is used, a good quality lubricant will reduce friction and wear by separating a bronze bushing from its shaft.To protect the bushing and lubricant in highly contaminated environments, recom mends using seals.
The standard diameter Standard Dia. | Outside diameter of bushing O.D.Size | To match a hole Housing Bore | Inner diameter of bushing I.D.Size | Match the diameter of axle Matching Shaft Diameter |
---|---|---|---|---|
10~18 | +0.065 +0.030 | +0.018 0 | +0.046 0 | - 0.016 - 0.043 |
18~30 | +0.075 +0.035 | +0.021 0 | +0.052 0 | - 0.020 - 0.020 |
30~50 | +0.085 +0.045 | +0.025 0 | +0.062 0 | - 0.025 - 0.064 |
50~80 | +0.100 +0.055 | +0.030 0 | +0.074 0 | - 0.030 - 0.076 |
80~120 | +0.120 +0.070 | +0.035 0 | +0.087 0 | - 0.036 - 0.090 |
120~180 | +0.170 +0.100 | +0.400 0 | +0.100 0 | - 0.043 - 0.106 |
180~250 | +0.210 +0.130 | +0.046 0 | +0.115 0 | - 0.050 - 0.122 |
250~315 | +0.260 +0.170 | +0.052 0 | +0.130 0 | - 0.056 - 0 |
Main applications
These bushings are well suited for machinery that must operate in
highly contaminated environments and where shock loads and/or vibrations occur.
• insensitive to contaminated environments
• resistant to shock loads and vibrations at slow speeds
• good resistance to corrosive environments
• agricultural machinery
• hoisting equipment
• construction machinery
• forestry machinery
E90F/E92F 2515 |
E90F/E92F 2520 |
E90F/E92F 2525 |
E90F/E92F 3020 |
E90F/E92F 3025 |
E90F/E92F 3020 |
E90F/E92F 3520 |
E90F/E92F 3525 |
E90F/E92F 3530 |
E90F/E92F 3535 |
E90F/E92F 4025 |
E90F/E92F 4030 |
E90F/E92F 4035 |
E90F/E92F 4040 |
E90F/E92F 4530 |
E90F/E92F 4535 |
E90F/E92F 4540 |
E90F/E92F 4550 |
E90F/E92F 5030 |
E90F/E92F 5035 |
E90F/E92F 5045 |
E90F/E92F 5550 |
E90F/E92F 6030 |
E90F/E92F 6035 |
E90F/E92F 6040 |
E90F/E92F 6050 |
E90F/E92F 6060 |
E90F/E92F 6530 |
E90F/E92F 6535 |
E90F/E92F 6540 |
E90F/E92F 6550 |
E90F/E92F 6560 |
E90F/E92F 7035 |
E90F/E92F 7040 |
E90F/E92F 7050 |
E90F/E92F 7060 |
E90F/E92F 7070 |
E90F/E92F 7535 |
E90F/E92F 7540 |
E90F/E92F 7550 |
E90F/E92F 7560 |
E90F/E92F 7570 |
E90F/E92F 8040 |
E90F/E92F 8050 |
E90F/E92F 8060 |
E90F/E92F 8070 |
E90F/E92F 8080 |
E90F/E92F 9050 |
E90F/E92F 9060 |