Self-Lubricating Bushing, This bronze bushing is produced in accordance with ISO 3547 and DIN 1494.

Diamond oil hole FB090 Bronze Material CuSn8 Or CuSn6.5 Metric TIN BRONZE Bushings Sheet Strip. Explore the plain bearings strips, sleeve bushings that meet your application's needs, as well as delivering high reliability, long service life. Sliding Bearings materials for plain bearings. Plain bearing manufacture. Sliding elements of the most varied shapes are produced from this composite by cutting.FB090 FB092 FB092H WF WB700 WB702 WB800 WB802

The plain bearing material - function, types, and applications

FB090  Split plain bearings bronze material is made of special high-density copper alloy strip as the base. The surface can be rolled with diamond or hemispherical oil holes and oil grooves. It has the advantages of high density, large bearing capacity, good wear resistance, and long service life. Materials have been widely used in lifting machinery, construction machinery, automobile tractor chassis, machine tool industry, and mining machinery, and can also be used in the form of bearing bushes, flanged bushings, thrust washers, and ball bowls.

Material: CuSn8P0.3 or CuSn6.5P0. 1

Hardness: HB90~120

Applicable temperature range: -80 ° C ~ 200 ° C

Maximum load pressure: 75N/mm2

Maximum sliding speed: 2.5m/s

The bearings are wrapped in a cold formable homogenous bronze (CuSn8),
which will obtain exceptional material properties. The standard size is fitted
with diamond-shaped lubrication indents on the surface of the bearing. These
indents serve as lubricant reservoirs to rapidly build up a lubrication film in the
start movement and therewith reduce the start friction.

 
VSB-22 Bronze CuSn8 with Lubrication 090 Strips, Slide paths

Bronze (090 Strips Material )

VSB-22

· Bearing material made of the solid bronze strip with indents for lubrication
· Good wear resistance, suitable for rough conditions
· Optimum performance under relatively high loads and low speeds
 
· 1.Easy for fitting and lubricating
· 2.High load capacity
· 3.Inner Diameter machineable parts are available against order
· 4.High level thermal conductivity
· 5.Minimum overall dimensions
· 6.Chemical resistance.
· Initial pre-lubrication at assembly required...
 

The bearings are wrapped from a cold-formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond-shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of the movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.

Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents

 
1. The products inside the surface is full of diamond oil indention, which can stock grease.
2. Minim oil lubrication, which is applied in a water-lubrication environment
3. Good anti-abrasion, low coefficient of friction, long operating life.
4. Can work consecutively at 100 ~+200 .
5. Good mending, low-noise, non-pollution
6. Thin wall, light, can reduce the volume of the machine
7. High density, high load no alveoli
The products now are applied in sliding parts of different machine, such as auto machines, pumps, plastic injection
machine, auto industry, heavy equipments, etc.

Bronze Bearings made of CuSn8 with Lubrication Indent Size Chart

Bronze Bearings and Bronze Sleeve Bushings Metric Size