Active Member
|
[China]
Address: Industry Park. JS, ZJ, China. 314100
Contact name:Tiffany
VIIPLUS INTERNATIONAL |
|
|
The C86300/C86200 graphite plugged sleeve, with inch dimensions of 2.5 ID (inner diameter) x 3 OD (outer diameter) x 2 length, is a high-performance component designed for various industrial applications. The sleeve's copper-based alloy offers excellent conductivity, corrosion resistance, and machinability. The addition of graphite plugs further enhances its performance, providing improved lubricity and wear resistance.
This sleeve is commonly used in rotating machinery, bearings, and other applications where precision and durability are critical. The inch dimensions ensure compatibility with standard inch-based components and systems.
The combination of C86300/C86200 alloy and graphite plugs creates a sleeve that can withstand high loads, temperatures, and speeds. It is an ideal choice for applications requiring superior performance and long-lasting durability.
inch size 2.5 ID x 3 OD x 2 Length
| Chemical Composition mass/% | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
| 60-66 | 0.2 | 5.0-7.5 | 2.0-4.0 | 2.5-5.0 | 1 | 0.2 | _ | _ | _ |
| Mechanical properties | |||
|---|---|---|---|
| Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
| 758 | 427 | 14 | 225 |
Note:
1,In Chemical Composition, Single values represent maximums.
2,Mechanical performance of hardness value is only for reference
Make customs clearance more smooth
Cross-border shipping?
VIIPLUS helps you complete the process step by step.
Brass: H62, HAl66-6-3-2, an ordinary high-strength brass, special
hard high-strength brass (HB> 250), etc. Aluminum Bronze:
QAl10-5-5, ZCuAl10Fe3, ZCuAl9Fe4Ni4Mn2, CuAl10Ni etc. Bronze:
ZCu5Pb5Zn5, CuSn7Zn4Pb7, CuSn8, CuSn12, ZCuSn10P1 etc. High lead
and copper: ZCuPb10Sn10, CuPb15Sn7 etc. Meanwhile according to
different customer requirements, in accordance with DIN, BS, EN,
UNS, SAE and Chinese GB standards of production of various products
(eg: CuZn39Pb3, CuZn40Al2, C86200, C95800, C48200). Welcome to
inquire!
C86300 Manganese Bronze
C86300 Typical applications include slow speed heavy duty load
bearings, gears, cams and hydraulic cylinder parts.continuous cast
manganese bronze is a high strength, non-heat treatable copper
alloy intended for use in applications requiring a good combination
of outstanding wear characteristics and high bearing strength for
heavy loads and slow speeds.
| C86300 Maganese Bronze Graphite Bushings | |
| ELEMENT | CONTENT (%) |
| Copper, Cu | 60.0-68.0 |
| Lead, Pb | ≤0.2 |
| Tin, Sn | ≤0.2 |
| Zinc, Zn | 22~28 |
| Iron, Fe | 2.0-4.0 |
| Aluminium, Al | 5.0-7.50 |
| Manganese, Mn | 2.5-5.0 |
| C86200 Maganese Bronze Graphite Bushings | |
| ELEMENT | CONTENT (%) |
| Copper, Cu | 60.0-68.0 |
| Lead, Pb | ≤0.2 |
| Tin, Sn | ≤0.2 |
| Zinc, Zn | 22~28 |
| Iron, Fe | 2.0-4.0 |
| Aluminium, Al | 3.0-4.90 |
| Manganese, Mn | 2.5-5.0 |
Graphite Plugged Cast Bronze Bushings can be utilized where heavy loads must be supported at low to medium speeds
The Plug Graphite Cast Bronze Bushing is able to withstand high temperatures up to 570 F
The self-lubricating feature allows bearings to be used where oiling is difficult, expensive to implement, and where grease/oil cannot be used. Excellent lubrication is achieved even under high loads at low speeds.
Self lubrication with specially embedded solid lubricants reduces friction. Coefficient of Friction: 0.04 to 0.2 typical
| Grade | 50# | 50S1 | 50S2 | 50S3 | 650S5 |
| Material | CuZn25AI5Mn4Fe3 | CuSn5Pb5Zn5 | CuAI10Ni5Fe5 | CuSn12 | CuZn25AI5Mn4Fe3 |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
| Hardness | ≥210 | ≥70 | ≥150 | ≥75 | ≥235 |
| Tensile strength | ≥750 | ≥250 | ≥500 | ≥270 | ≥800 |
| Yield strength | ≥450 | ≥90 | ≥260 | ≥150 | ≥450 |
| Elongation | ≥12 | ≥13 | ≥10 | ≥5 | ≥8 |
| Coefficient o linear expansion | 1.9×10-5/℃ | 1.8×10-5/℃ | 1.6×10-5/℃ | 1.8×10-5/℃ | 1.9×10-5/℃ |
| Max.Temp. | -40~+300℃ | -40~+400℃ | -40~+400℃ | -40~+400℃ | -40~+300℃ |
| Max.dynamic load | 100 | 60 | 50 | 70 | 120 |
| Max.speed(Dry) | 15 | 10 | 20 | 10 | 15 |
| N/mm²*m/s(Lubrication) | 200 | 60 | 60 | 80 | 200 |
| Compression deformation | < 0.01 mm | < 0.05mm | < 0.04mm | < 0.05mm | < 0.005mm |
Link Bushings for Construction Equipment, Boom Link Bushings for Power Shovels, Toggle Link & Guide Bushings for Injection Mold Machines, Steel Mill Equipment, Furnace Dragouts, Drying Equipment, Roasters, Press Dies, Assembly Lines, Hydro-Electric Structures, Winches, Hoisting Equipment, Tire and Paper Mill Machinery and Many Other Industrial Applications.
