VIIPLUS INTERNATIONAL |
|
Garlock Bearings Replacement sleeve
Plain-Bearing - Bore size, OD size, Length size, PTFE Material
80160/ PTFE Plain Bearing - ID=242, OD=247, Length=100mm
80161/ PTFE Plain Bearing - ID=300, OD=305, Length=100mm
VIIPLUS SLIDING BEARING Our range offered SME includes Metal Bushing, Steel Sleeve BushingThrust Washer, Bronze Graphite Plate, Valve Gearbox Bushings, and more. Besides these, we are also rendering Metal Coating Self-lubricating bearing Strips, Material Export Service and more.
Plain bearing materials Plain bearing Strips, Slide paths PAS Strips Material in detail Strip Metric Streifen, Gleitbahnen | VSB-10
Impregnated with our own proprietary lubricant, these bushings are composed of PTFE and special material uniformly dispersed within polyacetal plastic resin, a plastic material offering excellent bearing characteristics.
Provide high-quality self-lubricating products
Table of Contents
Material information
Plain bearing production
Characteristics: maintenance-free and robust
Material composition
Models and tables of dimensions
More information
Plain bearing Bearing Material production
Thrust washers PAW..
1.Very low stick-slip tendency
2.Low wear
3.Good chemical resistance
4.Low friction value
5.No tendency to weld to metal
6.Extremely swell-resistant
7.Does not absorb water
1.Maintenance-free operation under dry-running conditions
2.Rotating or oscillating movements
3.Up to a velocity of 2 m/s
4.Linear movements
5.Temperature range -200 °C to 280 °C
1. Running-in layer
PTFE matrix with bulking agent¹ |
|
Layer thickness [mm]: | max. 0.03 |
2. Sliding layer
Tin-lead-bronze |
|
Layer thickness [mm]: | 0.20–0.35 |
Pore volume [%]: | approx. 30 |
3. Bearing back
Steel |
|
Steel thickness [mm]: | Variable |
Steel hardness [HB]: | 100–180 |
1 The pores of the sliding layer are also filled with this lubricant mass.
1.Absorbing and transferring forces acting vertically to the running surface
2.Fixing moving components to each other
3.Ensuring guidance accuracy for axial movements over the entire service life
1.Material group P1 for maintenance-free, dry-running applications
2.Material group P2 for low-maintenance, lubricated applications
1. PTFE/Fibre mixture thickness 0.01~0.03mm. It is the contact surface for the
rotating shaft. Minute partides of the PTFE layer and the sintered
bronze material combine to create a solid lubricant film, which
coats the shaft.
2. Sintered bronze powder thickness 0.20*0.35mm,A special
composition of powdered copper is thermally fused to the steel
backing. This contact layer acts as an anchor for the PTFE layer
and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel backing. Setting the foundation of the bushings, the steel back provides exceptional stability, load carrying and heat dissipation characteristics.
· Metal-Polymer Composite Self-lubricating Bushing Material
· Steel Back + Porous Bronze Sinter +
· PTFE + Lead
Sliding layer |
OPERATING PERFORMANCE | |
Dry | Very Good |
Oil lubricated | Good |
Grease lubricated | Fair |
Water lubricated | Fair |
Process fluid lubricated | Fai |
GENERAL |
| Unit | Value |
---|---|---|---|
Maximum load, p | Static | N/mm2 | 250 |
Operating temperature | Min | °C | - 195 |
Coefficient of linear thermal expansion | Parallel to the surface | 10-6/K | 11 |
Normal to the surface | 10-6/K | 30 |
DRY |
|
|
|
Maximum sliding speed, U |
| m/s | |
Coefficient of friction |
|
| 0.03 - 0.20 * |
OIL LUBRICATED |
|
|
|
Maximum sliding speed, U |
| m/s | |
* Depending on operating conditions
Max. load | Static | 250N/mm2 |
Dynamic | 140N/mm2 | |
Max. speed | Dry | 2m/s |
Lubrication | >2m/s | |
Max. PV (Dry) | Short-time | 3.6N/mm2*·m/s |
Continuous | 1.8N/mm2*·m/s | |
Temp. | -195℃~+280℃ | |
Friction coefficient | 0.03~0.20 | |
Thermal conductivity | 42W (m·k)-1 | |
Coefficient of thermal expansion | 11*10-6k-1 |
Bearing forms available in standard dimensions
Metric bearings and imperial bushings made to order: standard
bushing forms in special dimensions, half-bushings, special shapes
obtained by stamping or deep drawing, customized bushing
designs
This material meets the demanding criteria for long life and
maintenance free performance with or without lubrication.
Automotive: tractors, combines, crop sprayers, earth-movers,
graders and other construction, auto machines, specific uses in
power steering cylinders, steering gear thrust washers, disc
brakes, calipers and pistons, shock absorbers, governor linkage,
windshield wiper motor, tilt gear assemblies...
Business machines: photocopy machines, typewriters, mail sorters,
postage meter systems, computer terminal printers and peripheral
equipment, automatic printing devices, mail processing machinery...
Hydraulics and valves: pumps including gear, rotary, water, axial
piston, and other types, ball, butterfly, poppet steam, and other
valves and valve trunnions...
Home appliances: tape recorders, refrigerators, air conditioners,
cleaners, polishers, sewing machines, ovens, dishwashers, clothes
washing machines...And materials handling, marine engine,
packaging, textile equipment, tools...etc.
START YOUR
a project with an Application Engineer