The dry sliding bearings are encapsulated sliding bearings made of a three-layer composite produced from a steel strip.

Self-lubricating bearings Engeneering in Motion.High-quality steel sleeve bushing or stainless steel Food-friendly design Plain Bearings and Sleeve Bearings Metal-Polymer Grease Lubricated POM Bushes | Special sleeve bushings lead free requirements in the Beverage technology General packaging Food industry in high temperatures availabe

ROLLED DRY SLIDING BEARINGS (POM)

Materiai:Carbon Steel + Copper Powder + POM (without lead

Typicai applicaton

It's used in vehicle chassis, forming machine tools, steel metallurgical machinery, mineral mountain machinery, hydraulic industry and rolling steel industry, etc.

Wrapped Acetal Lined (low-maintenance), oil or grease lubricated bearings, carbon steel shell with sintered bronze layer with a co-acetal polymer layer, plain bearings, thrust washer and strip

Steel + Bronze Powder + POM(DX)

Self Lube Bearings Product Category SF-2 Boundary Lubricating Bearing

Characteristics

VSB-20 Boundary lubrication bearing High Quality DX Bushing POM Bush China Manufacturer
· marginally lubricated bushings for grease or oil lubricated applications
· Standard parts contain grease indents in the sliding layer; plain sliding layer available by request
· Optimum performance under relatively high loads and low speeds
· Suitable for linear, oscillating and rotating movements
· Wide range of parts available from stock

 Product Range

The products and their competitive pricing

• Bush Bearing

• Sintered Bearings

• Self Lubricated Bush Bearings

• Sintered Bronze / Iron Sintered Self Lubricated Bushes

• Dry Bushes & Washers

• Graphite Filled Bronze Bushes

Suitable for rotating and oscillating movement, less maintenance requirements due to the long re-lubrication intervals, lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviours, good resistance to shock loads.

Strusture

1. POM thickness 0.30~0.50 mm. It provides high wearresistance and low friction even with only minute volume oflubricant are supplied, this bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.
2. Sintered bronze powder thickness 0.20-0.35mm. A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the PTFE layer and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel.Setting the foundation of the bushings, the steel back provides exceptional stability,load carrying and heat dissipation characteristics.

· Metal-Polymer Composite Bushing Material
· Steel Back + Porous Bronze Sinter +
POM with Lubrication Indents

Bearing forms available in standard dimensions
· Cylindrical bushes
· Thrust washers
· Sliding plates
 
Metric bearings and imperial bushings made to order: standard bushing forms in special dimensions, half-bushings, special shapes obtained by stamping, bearings with locating notches, lubricant holes and machined grooves, customized bushing designs