VIIPLUS INTERNATIONAL |
|
When it comes to bushings that require superior wear resistance and self-lubricating properties, stainless steel bushings with a wrapped PTFE lining are an excellent choice. These bushings, often referred to as TEX bushings, offer a unique combination of durability, corrosion resistance, and low-friction performance.
The stainless steel material provides the bushings with excellent strength and durability, ensuring they can withstand heavy loads and frequent use. The wrapped PTFE lining, on the other hand, provides a smooth, low-friction surface that significantly reduces wear and tear. This allows for smoother and more efficient operation, especially in applications where lubrication may not be readily available or feasible.
The combination of stainless steel and PTFE also makes these bushings resistant to corrosion, chemicals, and other harsh environmental factors. This ensures they can perform reliably in a wide range of conditions and environments.
TEX bushings are designed to meet the specific requirements of high-performance applications. They are often used in precision machinery, industrial equipment, and other critical systems where reliability and long-lasting performance are essential.
In summary, self-lubricating stainless steel bushings with a wrapped PTFE lining offer an optimal solution for applications that require superior wear resistance, low-friction performance, and corrosion resistance. TEX bushings are a trusted choice for demanding applications where reliability and durability are paramount.
unique design solutions to complex Areas of use problems
Self-lubricating Bearings Rolling Steel sleeve Stainless Steel 316
TEX bushings Wrapped PTFE
VIIPLUS bearing use the PTFE fibres fabric and aramid fiber overlay on metal backings,the fabric have very high load capacity and high accuracygood run with low speed and heavy friction superior performance,widely used in heavy equipment like construction machinery,agriculture machinery
Load capacity | 140N/mm² | Friction Coef | 0.04~0.20 |
Temperature | -195℃~280℃ | PV limit(dry) | 3.6N/mm²·m/s |
Speed limit | 5m/s | PV limit(oil) | 22N/mm²·m/s |
Stainless Steel 316 PTFE +MOS2
mos2 ptfe bush
Wrapped PTFE Lined (maintenance-free), self lubricated plain bearings, thrust washer and strip, stainless steel shell with sintered bronze layer filled with PTFE VSB-33 Dry bearing 316+PTFE Product Overview:Apply to the oil or fuel work harder parts,wear resistance,low coefficient of...
Wrapped PTFE Lined (maintenance-free), self lubricated plain
bearings, thrust washer and strip, stainless steel shell with
sintered bronze layer filled with PTFE
It is backed with stainless steel with porous bronze sintered on it and polymers imbedded into the bores of the bronze. The stainless steel back provides the bush with stronger mechanic strength and load capability. By combining the metals and the polymers tog, the products are endowed with the lower friction coefficient and good capacity of anti-abrasion and self-lubrication. Moreover, the stainless steel back can be effectively preventing chemical erosion. This series are widely applied in printing and dyeing machines, and machines used in the ocean industry, etc.
Stainless Steel Bronze Powder + PTFE Self Lubricating Bearings Multilayer Composite
This new material use the PTFE fibre fabric overlay on metal
backings, the fabric have very high load capacity and much longer
operating life compare with conventional 3-layer bushes. The metal
can be carbon steel. stainless steel.
Stainless Steel 316 Sleeve Bushing Specification & Tolerance
Product Overview:Apply to the oil or fuel work harder parts,wear
resistance,low coefficient of ftiction,long life:good overall
performance.Apply to the oil or fuel work harder parts,wear
resistance,low coefficient of friction,long life;good iverall
perfotmance.
VSB-33 Plain Bearings and Sleeve Bearings
Stainless steel bearing is of oil resistant,acid resistant,alkali
resistant and seawater resistant,more over,there is no lead in the
PTFE surface layer and so is particularly fit for application in
food machinery,alkali flow meters,pumps motion elements in
pharmaceutical machines,printing machines chemical engineering
machines and other ocean industry.The bushing is a triple layers
composites one,the base material is stainless steel back and a film
of heat resistant power filled PTFE being calendered onto the
sintered spherical bronze interlayer.
Suitable for dry running, low coefficient of friction, lower wear, good sliding
characteristics, forming a transfer film can protect the mating
metal surface, suitable for rotary and oscillating movement.
Stainless steel backing provides improved corrosio...
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
· Thrust washers
· Flanged washers
Metric bearings and imperial bushings made to order: Standard
bushing forms in special sizes.
VSB is professional as one of the leading manufacturers and
suppliers of VSB-33 stainless steel 316 bearings +ptfe in China. We
are equipped with a professional factory which covers a great deal
of qualified workers. Please feel free to buy VSB-33 stainless
steel 316 bearings +ptfe made in China with us.
Plain bearings are available as bushes, collar bushes, washers, strips or special designs.
START YOUR
PROJECTWITH AN APPLICATION ENGINEER