JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
|
|
The C93200 is a us standard lead-tin bronze with no domestic equivalent.
Manufacturing stocks an inventory of plain bronze sleeve bushings
in industry standard sizes. Our standard sleeve bearings are
manufactured out of continuous cast C93200 Bearing Bronze. Plain bushings are also manufactured from various other customer
specified alloys.
The C93200 (SAE660 RG7) is considered the "standard" bearing material for lead-tin
bronze.The alloy has excellent machining performance, good
hardness, strength and wear resistance, excellent wear
resistance.Typical applications include bearings, gaskets, bushing,
auto parts, main shaft bearing, machine tool bearings, crane
bearing, trunnion bearing, roller bearing neck, rolling mill
bearings, sleeve is fuel pump and pump shaft sleeve, diesel engine
piston pin bushing, forging toggle lever bearing, stuffing box
hydraulic press, hydraulic press main lining, pump impeller, gm
liner, fitting, pump assembly, outer spherical bearings, and so on.
Category:Casting Copper Alloy
Chemical Composition mass/% | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
81.0-85.0 | 6.3-7.5 | 0.01 | 0.2 | - | 1 | 6.0-8.0 | 0.01 | 1.5 | 2.0-4.0 |
Mechanical properties | |||
---|---|---|---|
Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
241 | 138 | 10 | 65 |
1,In Chemical Composition, Single values represent maximums.
2,Mechanical performance of hardness value is only for reference
Aluminum bronze is the highest strength standard copper based alloy.VIIPLUS produces C95400, C95500 and C95900 in standard sizes of Cast Bronze Bushings . Aluminum, in conjunction with iron and nickel in C95500, acts as a strengthener in these alloys. All of the aluminum bronzes can be heat treated, further increasing tensile strengths.
Chemical Composition mass/% | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
Min83.0 | - | 10.5-11.5 | 3.0-5.0 | 0.5 | 1.5 | - | - | - | - |
Mechanical properties | |||
---|---|---|---|
Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
586 | 221 | 12 | 170 |
Note:
1,In Chemical Composition, Single values represent maximums.
2,Mechanical performance of hardness value is only for reference
Chemical Composition mass/% | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
60-66 | 0.2 | 5.0-7.5 | 2.0-4.0 | 2.5-5.0 | 1 | 0.2 | _ | _ | _ |
Mechanical properties | |||
---|---|---|---|
Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
758 | 427 | 14 | 225 |
Note:
1,In Chemical Composition, Single values represent maximums.
2,Mechanical performance of hardness value is only for reference
VSB-50 Solid Bronze Metallic Self-lubricating Bearings
Cast Bronze Bearing with Graphite Plugs
Material:
CuSn12
Structure Characteristics and Applications
VSB-50 Solid Lubricating Bearing is produced by strengthening brass
that has good physical performance and good capability for casting.
What's more, the brass material has pretty good anti-erosion abitity in air,
fresh water and sea water. The surface is regularly and finely
machined with sockets in which particular solid lubricant is filled. The product is widely used on consecutive casting and rolling
machines, mine-exploiting equipments, ships, steam engine, etc.
The product is widely used on consecutive casting and rolling machines, mine-exploiting equipments, ships, steam engine, etc.
VSB-50 Solid lubricating bearings
1. May work without any ol for long period
2. Extremely high load capacity, good anti-wear and lower friction
3. Particularly appropriate for low speed and high load
4. Suitable for reciprocating, oscillation or intermittent motion
where oil film is hard to be formed
5. Good chemical resistant and anti-corrosion characteristics
6. Can b€ used in wide range of temperature from -40℃-+300℃
VSB-50 material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
Performance | Data | |
Material | CuSn5Pb5Zn5 | |
Density | 8.9g/cm³ | |
Hardness | >95HB | |
Tensile strength | >260N/mm² | |
Yeild strength | >150N/mm² | |
Elongation | >18 % | |
Coefficient of linear expansion | 1.8·10-5/℃ |
Performance | Data | |
emp. Limits | -40~+400℃ | |
Max. Dynamic Load | 70N/mm² | |
Max.speed V | 10m/min | |
Max.PV | 80N/mm²*m/min | |
Besides the standard products displayed in the list of this catalogue, we can also supply non-standard products or develop according to customer design. |
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
Bearing forms made to order: standard forms in special dimensions,
thrust washers, flanged thrust washers, half-bearings, special
shapes obtained by stamping or deep drawing, customized bearing
designs
This kind of bearing can be applied under dry, high temperature, high pressure,
corrosive, water or other chemical environments when no oil can be introduced. It is widely used in automotive
products line, water engineering, dam gate, plastic industries,
successive casting machines, steel rollers in metallurgy industry,
mineral machines, ships, turbo generators, hydraulic turbines and
injection molding machines...
China Bearing Technologies
START YOUR
PROJECTWITH AN APPLICATION ENGINEER