JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
|
C86300 (SAE 430B CuZn25Al5Fe3Mn4) Centrifugal Casting Bronze
Bushing Custom Size Sliding Bearing Bush made in china
You can search for C86300 bronze bushings products.CAD data
downloading is also available for registered members.
Cu | Sn | Pb | Zn | Fe | Ni | Sb | P | S | Al | Mn | Si |
60.00-66.00 | 0.2 | 0.2 | 22.00-28.00 | 2.0-4.0 | 1.0 | N/A | N/A | N/A | 5.0-7.5 | 2.5-5.0 | N/A |
Tensile Strength (min) | Yield Strength (at 0.5% extention under load min) | Elongation (in 2in. or 50mm min, %) | Brinell Hardness (min) | ||
Ksi | MPa | Ksi | MPa |
|
|
110 | 758 | 62 | 427 | 14 | 210 |
Excvavtor bushes Solid Bronze Metallic CuZn25AI5Mn4Fe3 Plug
Graphite Cast Bronze Bearings Solid Bronze Lubrication
with best solutions or any problem in self lubricatng bearings
in Excvavtor bushes
Metal base inlaid solid self-lubricating bearing (JDB for short) is
a new type of self-lubricating bearing which has the
characteristics of both metal bearing and self-lubricating
bearing.It has the characteristics of high bearing capacity, impact
resistance, high temperature resistance, strong self-lubricating
ability and so on, especially suitable for heavy load, low speed,
reciprocating or oscillating and so on difficult to lubricate and
form oil film occasions, also not afraid of water and other acid
corrosion and erosion.It is generally reported by the majority of
users that embedded bearings not only save oil and energy, but also
have a longer working life than ordinary sliding bearings.At
present, the products have been widely used in metallurgical
continuous casting machines, steel rolling equipment, mining
machinery, ships, steam turbines, water turbines, injection molding
machines and equipment production lines.
C86300 (SAE 430B CuZn25Al5Fe3Mn4) is a tough, corrosionresistant alloy
with outstanding wear characteristics. Ideal for high load, lowspeed applications including Gears, Valve
Stems,Bushings, Cams, Wear Rings for Pressing Dies for Wood Pulp
Industry, HighStrength Machine Parts, Hooks, Frames, Shafts, Marine
VSB-50 Solid Bronze Metallic Self-lubricating Bearings
Cast Bronze Bearing with Graphite Plugs
Excvavtor bushes
CuZn25AI5Mn4Fe3
VSB-50 Solid Lubricating Bearing is produced by strengthening brass
that has good physical performance and good capability for casting.
What's more, the brass material has pretty good anti-erosion
abitity in air, fresh water and sea water. The surface is regularly
and finely machined with sockets in which particular solid
lubricant is filled. The product is widely used on consecutive
casting and rolling machines, mine-exploiting equipments, ships,
steam engine, etc.
VSB-50 Solid lubricating bearings
1. May work without any ol for long period
2. Extremely high load capacity, good anti-wear and lower friction
3. Particularly appropriate for low speed and high load
4. Suitable for reciprocating, oscillation or intermittent motion
where oil film is hard to be formed
5. Good chemical resistant and anti-corrosion characteristics
6. Can b€ used in wide range of temperature from -40℃-+300℃
VSB-50 SOLID LUBRICANT SLIDING BEARINGS material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
Grade | 50# | 50S1 | 50S2 | 50S3 | 650S5 |
Material | CuZn25AI5Mn4Fe3 | CuSn5Pb5Zn5 | CuAI10Ni5Fe5 | CuSn12 | CuZn25AI5Mn4Fe3 |
Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
Hardness | ≥210 | ≥70 | ≥150 | ≥75 | ≥235 |
Tensile strength | ≥750 | ≥250 | ≥500 | ≥270 | ≥800 |
Yield strength | ≥450 | ≥90 | ≥260 | ≥150 | ≥450 |
Elongation | ≥12 | ≥13 | ≥10 | ≥5 | ≥8 |
Coefficient o linear expansion | 1.9×10-5/℃ | 1.8×10-5/℃ | 1.6×10-5/℃ | 1.8×10-5/℃ | 1.9×10-5/℃ |
Max.Temp. | -40~+300℃ | -40~+400℃ | -40~+400℃ | -40~+400℃ | -40~+300℃ |
Max.dynamic load | 100 | 60 | 50 | 70 | 120 |
Max.speed(Dry) | 15 | 10 | 20 | 10 | 15 |
N/mm²*m/s(Lubrication) | 200 | 60 | 60 | 80 | 200 |
Compression deformation | < 0.01 mm | < 0.05mm | < 0.04mm | < 0.05mm | < 0.005mm |
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
Bearing forms made to order: standard forms in special dimensions,
thrust washers, flanged thrust washers, half-bearings, special
shapes obtained by stamping or deep drawing, customized bearing
designsCustomer Size
Customer Size
START YOUR
PROJECTWITH AN APPLICATION ENGINEER