Durable 1HL Brite Tank Brewing 304 Stainless Steel Dimple Jacketed / Side Manhole

1hl-200hl 304 Stainless Steel Bright Beer Tank With Dimple Jacketed And Side Manhole

Beer distribution tanks are often also called serving tanks, tax determination tanks or clear beer tanks (=CBTs), bright beer tanks (=BBTs) or maturation/storage or conditioning tanks. These tanks are used for the storage of the beer prior to being served or packaged. Depending on their application the beer serving tanks can be glycol jacketed or can be located in a walk-in cooler. For brewpubs serving is often done by pumping or pressurizing the beer toward the serving location.

Top Quality Components

All product leading parts in stainless steel 304 and food grate;

Complete per-fabricated unit, grinded surface, well welded, prolong the service life of equipment;

Perfect design, top quality accessories, to minimize the equipment’s failure rate.

Specification

Effective capacity - 200L. Total capacity – 250L.

²Working pressure - 0.1MPa. Design pressure - 0.15Mpa

²Inner - Cone top, cylinder body, 60°cone bottom.

²3 legs.

²Top manhole with CIP tube and spray ball.

²1 Tri-clamp PVRV

²1 Tri-clamp sample cock

²1 hand-moved pressure gauge & 1 hand-moved thermometer

²1 racking arm on cone side

²1 drain on cone bottom

²3 butterfly valves

Material - Inner & outer clad S.S. 304.Tri-clamp sanitary pipelines and valves.

Design pressure 45 psi (3bar); working pressure 15psi (1bar)

4 stainless steel legs with leveling footpads

Interior shell: 304 stainless steel, thickness 3mm

Exterior shell: 304 stainless steel, thickness 2mm

Interior and exterior finish bright polish to 0.2~0.4 μm, hygiene surface

All Interior welds ground to a smooth0.2~0.4 μm sanitary finish

Flanged and dished head top and bottom

20% headspace unless a different volume is requested

Combined drain extensions and beer port are standard

Top manway or side manway door

Dual zone in sidewall and bottom dimple cooling jacket with glycol inlet and outlet

Polyurethane insulation thickness 80mm for cooling jacket on side and bottom

Non welding CIP arm and rotating 360 degree reach spray ball

Carbonation system with micron stone

Solenoid valve, pressure relief valve (safe valve) are standard.

Pressure gauge

Temperature sensor well

All clamps and gaskets to attach all accessories

Tank complete with piping, fittings, sanitary valves and all parts.