150L Stainless Steel Pilot Brewing Equipment 100% TIG Welding Tri Clamp Connections

50L Stainless Steel Pilot Brewing Equipment With Tri-Clamp Connections And 100% TIG Welding

150L Pilot Beer Brewing Equipment Introduction

Mini /1BBL /3BBL/5BBLor customized
• Mash Lauter Tun with grist hydrator
• Kettle Whirlpool Tank with heating jacketed
• Grant Tank
• Stainless steel Platform
• Plate Heat Exchanger
• Sanitary Wort Pump x2;
• Wort Oxygenator;
• Semi-Auto Control Panel;
• Interior surface to finish pickled and passivated
• Exterior surface to brushed, #4 finish
 

Method of Heating Ways:
• Steam: Dimple plate jacket with inlet/outlet fittings for Steam heat transfer;
• Electric: Use electric heaters in jacket to heat the medium in the jacket
• Gas fired: Use gas burner at bottom to heat tank directly;

150L Pilot Beer Brewing Equipment Specifications

150L Pilot Beer Brewing Equipment Configuration

1x 150L mash/lauter boiling whirlpool combined tank
1x one plate heat exchanger for wort cooling
1x centrifugal type wort pump
2x 150L fermentation tank with cooling jacket and insulation
1x glycol water tank with refrigerator for cooling fermentation tanks
1x controlling panel for all flow and temperature control, digital panel or plc optional
All tanks interior shell 2mm, cladding shell 1.5mm, SUS304;

150L Pilot Beer Brewing Equipment Power Request

Heating Elements: 6kw; 220v/50,60Hz-1p;
Wort pump:0.55kw; 220v/50,60Hz-1p;
Refrigerator:1.5KW; 220v/50,60Hz-1p;

150L Pilot Beer Fermenting Equipment Configuration

Control method: Temperature control
Alternative manholes: Lateral manhole or top manhole. Racking arm is theoretical necessary.
Conical fermenter with 60 degree conical angle.
Working pressure: 1 bar; Design pressure: 3 bar
With CIP pipe at the side to wash out tank thoroughly.

Thickness is same as the brewhouse system
Insulation: Polyurethane Thickness depends on the capacity of fermenter
All components are included. Such as relief valve, mechanical regulation valve, pipes, hop adding hole, thermometer, Temperature probe, Sample valve, etc...

150L Pilot Brewing Cooling system
1). Glycol water tank (Quantity and capacity should depend on the fermenter).
2). Cold water tank(Optional)
3). Refrigeration unit
4). Circulation pump

150L Pilot Brewing Control system
Control system includes 2 types of control method: Fully automatic and VFD control method.
1). VFD control method: Control the fermenter and brite beer tank and brewhouse by temperature.
2). Fully automatic control method means all things is automatic. sush as the valves are all pneumatic, The raker and blender of the lauter tun and kettle can be hydraulic control, the milling system(miller and malt conveyor) is also automatic, you can set in your PC and then it can feed the mash tun automatically.


150L Pilot Brewing CIP system