Active Member
|
[China]
Address: 101 Building E20 Grid Center, Tangkou Industrial Zone, Tianliao Community, Yutang Street, Guangming District, Shenzhen City
Contact name:Lily Ying
Shenzhen Guangmaoqixing Technology Co., Ltd. |
|
|
Factory Price Carbide Cutting Tools P-UEX 2/4/6 Flutes Square End Mills
1.HRC65
2.For Pre-hardened Steel, Hardened Steel
Workpiece material
Hardened Steel
Application Type
Finishing
Semi-Finishing
Roughing
Flute Type
Square
Coating
Aluminum Titanium Nitride Coating
High Silicon Mixed Nano Coating
Product Description
Design Features:
1.Chamfering passivation protection, life improved by at least 30%
2. a≠b Unequal pitch , θ1≠θ2 Variable helix ,improve anti-vibration
3. The ultra-micro passivation process of about 12um greatly increases around 4 timex of its life time
4.Sharp and strong design ,for 35 °~60° Hardened steel
5.Straight type Design for Minimizing edge chipping
6.High precision surface processing
7.A variety of flute lengths are available
8.Recommended high speed 12000 ~ 20000rpm, oil mist cooling
Specifications
| type | specification | Flute dia | Flute length | Shank dia | Overall |
| D | H | d | L | ||
| standard square | D1.0X3XD4X50 | 1 | 3 | 4 | 50 |
| D1.0X3X6X50 | 1 | 3 | 6 | 50 | |
| D1.0X4XD4X50 | 1 | 4 | 4 | 50 | |
| D1.0X6XD6X50 | 1 | 6 | 6 | 50 | |
| D1.5X4XD6X50 | 1.5 | 4 | 6 | 50 | |
| D1.5X4.5XD4X50 | 1.5 | 4.5 | 4 | 50 | |
| D2.0X6XD4X50 | 2 | 6 | 4 | 50 | |
| D2.0X6XD6X50 | 2 | 6 | 6 | 50 | |
| D2.5X7XD4X50 | 2.5 | 7 | 4 | 50 | |
| D2.5X7XD6X50 | 2.5 | 7 | 6 | 50 | |
| D3.0X8XD3X50 | 3 | 8 | 3 | 50 | |
| D3.0X8XD4X50 | 3 | 8 | 4 | 50 | |
| D3.0X8X6X50 | 3 | 8 | 6 | 50 | |
| D3.5X10XD4X50 | 3.5 | 10 | 4 | 50 | |
| D3.5X11XD6X50 | 3.5 | 11 | 6 | 50 | |
| D4.0X11XD4X50 | 4 | 11 | 4 | 50 | |
| D4.0X11XD6X50 | 4 | 11 | 6 | 50 | |
| D4.5X13XD6X50 | 4.5 | 13 | 6 | 50 | |
| D5.0X13XD5X50 | 5 | 13 | 5 | 50 | |
| D5.0X13XD6X50 | 5 | 13 | 6 | 50 | |
| D5.5X13XD6X50 | 5.5 | 13 | 6 | 50 | |
| D6.0X15XD6X50 | 6 | 15 | 6 | 50 | |
| D6.5X10XD8X60 | 6.5 | 10 | 8 | 60 | |
| D6.5X17XD8X60 | 6.5 | 17 | 8 | 60 | |
| D7.0X17XD8X60 | 7 | 17 | 8 | 60 | |
| D7.5X17XD8X60 | 7.5 | 17 | 8 | 60 | |
| D8.0X20XD8X60 | 8 | 20 | 8 | 60 | |
| D8.5X23XD10X75 | 8.5 | 23 | 10 | 75 | |
| D9.0X23XD9X75 | 9 | 23 | 9 | 75 | |
| D9.0X23XD10X75 | 9 | 23 | 10 | 75 | |
| D9.5X25XD10X75 | 9.5 | 25 | 10 | 75 | |
| D10.0X25XD10X75 | 10 | 25 | 10 | 75 | |
| D10.5X25XD12X75 | 10.5 | 25 | 12 | 75 | |
| D11.0X28XD12X75 | 11 | 28 | 12 | 75 | |
| D11.5X28XD12X75 | 11.5 | 28 | 12 | 75 | |
| D12.0X30XD12X75 | 12 | 30 | 12 | 75 | |
| D13.0X45XD14X100 | 13 | 45 | 14 | 100 | |
| D14.0X45XD14X100 | 14 | 45 | 14 | 100 | |
| D15.0X45XD16X100 | 15 | 45 | 16 | 100 | |
| D16.0X45XD16X100 | 16 | 45 | 16 | 100 | |
| D17.0X45XD18X100 | 17 | 45 | 18 | 100 | |
| D18.0X45XD18X100 | 18 | 45 | 18 | 100 | |
| D20.0X45XD20X100 | 20 | 45 | 20 | 100 | |
| D22.0X45XD22X100 | 22 | 45 | 22 | 100 | |
| D25.0X45XD25X100 | 25 | 45 | 25 | 100 | |
| Long shank | D1.0X3XD4X75 | 1 | 3 | 4 | 75 |
| D1.5X4.5XD4X75 | 1.5 | 4.5 | 4 | 75 | |
| D2.0X6XD4X75 | 2 | 6 | 4 | 75 | |
| D2.5X7XD4X75 | 2.5 | 7 | 4 | 75 | |
| D3.0X8XD3X75 | 3 | 8 | 3 | 75 | |
| D3.0X8XD4X75 | 3 | 8 | 4 | 75 | |
| D3.0X8XD6X75 | 3 | 8 | 6 | 75 | |
| D3.0X8XD4X100 | 3 | 8 | 4 | 100 | |
| D3.0X8XD6X100 | 3 | 8 | 6 | 100 | |
| D3.5X10XD4X75 | 3.5 | 10 | 4 | 75 | |
| D4.0X11XD4X75 | 4 | 11 | 4 | 75 | |
| D4.0X11XD4.0X100 | 4 | 11 | 4 | 100 | |
| D4.0X11XD6X100 | 4 | 11 | 6 | 100 | |
| D4.5X13XD6X75 | 4.5 | 13 | 6 | 75 | |
| D5.0X13XD5X75 | 5 | 13 | 5 | 75 | |
| D5.0X13XD6X75 | 5 | 13 | 6 | 75 | |
| D5.0X13XD6X100 | 5 | 13 | 6 | 100 | |
| D5.5X13XD6X75 | 5.5 | 13 | 6 | 75 | |
| D6.0X15XD6X75 | 6 | 15 | 6 | 75 | |
| D6.0X15XD6X100 | 6 | 15 | 6 | 100 | |
| D6.5X17XD8X75 | 6.5 | 17 | 8 | 75 | |
| D7.0X17XD8X75 | 7 | 17 | 8 | 75 | |
| D7.0X17XD8X100 | 7 | 17 | 8 | 100 | |
| D7.5X17XD8X75 | 7.5 | 17 | 8 | 75 | |
| D8.0X20XD8X75 | 8 | 20 | 8 | 75 | |
| D8.0X20XD8.0X100 | 8 | 20 | 8 | 100 | |
| D8.0X20XD8X150 | 8 | 20 | 8 | 150 | |
| D8.0X40XD8X150 | 8 | 40 | 8 | 150 | |
| D9.0X23XD10X100 | 9 | 23 | 10 | 100 | |
| D10.0X25XD10X100 | 10 | 25 | 10 | 100 | |
| D10.0X25XD10X150 | 10 | 25 | 10 | 150 | |
| D11.0X28XD12X100 | 11 | 28 | 12 | 100 | |
| D12.0X30XD12X100 | 12 | 30 | 12 | 100 | |
| D12.0X30XD12X150 | 12 | 30 | 12 | 150 | |
| D16.0X40XD16X150 | 16 | 40 | 16 | 150 | |
| D16.0X40XD16X200 | 16 | 40 | 16 | 200 | |
| D18.0X40XD18X150 | 18 | 40 | 18 | 150 | |
| D20.0X40XD20X150 | 20 | 40 | 20 | 150 | |
| D20.0X40XD20X200 | 20 | 40 | 20 | 200 |
Detailed Images
a≠b Unequal pitch , θ1≠θ2 Variable helix ,improve anti-vibration
Advantages
> Cutting Edge passivated to 10um, extend tool life
> Thick negative rake design, suitable for processing hard steel up to 60HRC
> Double rear corners to avoid empty space to increase chip removal
> Unequal spiral angle design prevents from vibration
> Well coating with Balzers AD coated to increase tool toughness and pro-long tool life
FAQ
Q: What kind of CNC lathe machine is good for this P-UEX milling cutter?
Better this milling cutter use on the CNC lather machine which RMP can run to 12000-20000.
Q:What kind of material is this carbide end mill working for?
P-UEX carbide cutter is working for mold steel, quenched steel, harden steel from HRC42 to HRC60
Q: How do we use it? For side milling or surface milling?
P-UEX is excellent for mirror surface milling for steel, so we suggest better use it for surface milling
Q: Which industry is this carbide cutter P-UEX normally for?
It is normally used in the auto industry, aerospace industry, mold industry.
