50 Bar High Pressure Manual Water Pressure Test Pump 5MPA Pipeline Test Pump

50 bar High Pressure manual water pressure test pump / manual hydrostatic tester RP-50

Description

RP-50 manual pressure test pump is atmospheric in appearance, easy to use,and has double valve pressure locking function to make the pressure more accurate.
RP-50 Hand test pump with double value lock pressure function makes the pressure more accurate. It is magnificent in outlook and easy to use.

Specification

Photo	Model	Pressure	Flow volume	G.W/N.W	Water tank volume	Meas	Note
	RP-50	0-5MPA 0-50BAR	45ML	8.5/8KG	12L	49.5*18.5*30cm	Ordinary steel plate thickness 2mm
	RP-50	0-5MPA 0-50BAR	45ML	8.5/8KG	12L	49.5*18.5*30cm	Fine steel plate thickness 2mm
	RP-50	0-5MPA 0-50BAR	45ML	9.2/8.7KG	12L	49.5*18.5*30cm	All copper piston steel plate thickness 2mm
	RP-50	0-5MPA 0-50BAR	45ML	8.5/8KG	12L	49.5*18.5*30cm	Stainless steel body All copper piston steel plate thickness 2mm

You see our price is base on above red one, for other size, if you want know price, pls feel free to contact us, tks.

Advantages:
1. Hydraulic testing for leaks in heating and oil installations, air-conditioning, splinker and systems.
2. Completed with high pressure hose and connectors.
3. Pump plunger can be lubricated and has replaceable seals.
4. Efficient running needle valves ensure continuous operation.
5. Testing and Pressure range: 0-50 bar.
6. Testing equipment hydro test pump.

Packing:
We put pp fittings into nylon bags then cartons outside. We also packed other pipe fittings with plastic bags.

Shipping:
For sample orders, we can ship it by international express, such as DHL, FEDEX, TNT and China EMS.
For bulk orders, we support air cargo and sea shipping, our factory are near from Shanghai port and Ningbo port, and we can transfer goods to port within 24 hours.

Instruction for use of Manual test pump

1. Before using the pressure test pump, check in detail whether the joints of each component are tightened, whether the pressure gauge is normal, and whether the inlet and outlet pipes are installed properly.
2. In order to improve the pressure test efficiency, the container or equipment to be tested can be filled with water first, and then the outlet pipe of the pressure test pump can be connected.
3. During the pressure test, if you find that there is a lot of air in the water, you can open the water valve and let the air out.
4. If any slight water seepage is found during the pressure test, the work should be stopped immediately for inspection and repair, and it is strictly forbidden to continue to increase the pressure in the case of water seepage.
5. After the pressure test is completed, first loosen the water valve, and the pressure will drop to avoid damage to the pressure gauge.
6. When the pressure test pump is not in use, the water in the pump should be drained and a small amount of oil should be sucked in to prevent corrosion.

Our service:

Our Expertise is our Strength. Our team of experts understand the products and its application very well, who can guide our valuable customers to select the right product for the right application.
Light Weight Portable Hand Pressure Test Pump With Reasonable Price
The color could be designed by yourself, the same as your logo.