|
[China]
Trade Verify
Address: NO.58, LEITING ROAD. HANGZHOU, CHINA
Contact name:YeGuiFeng
Hangzhou Suntech Machinery Co, Ltd |
|
Verified Suppliers
|
|
|
Roll Type Carton Closing Staple Machine Double Divergent Point Staple Machine
Roll type carton closing staple machine
Products Description
Our company has advanced technology and rich experience, by widely
absorbing the advanced technologies of domesctic and overseas,
thoroughly taking the processing needs of modern staple line into
consideration, and keeping revising and improving.
Thanks to our adopting the latest processing technology, precise
assembly and debugging technology, and strict quality test, our
products are of good quality and stable performance.
Copper coated or zinc coated round steel wire in coils are put on passive driven type wire stands pay-off, then go through two pairs of straightening rollers(one in vertical and one in horizontal), go into one pair of flattening rollers to form flatten wire(the distance between two flattening wire can be adjusted according to actual size need). Then be cut and punched into required shape type single wire, meanwhile be sticked together by adhesive tape, then wind into roll type onto required paper sleeves.
For all sizes, machine structure is same. When the staple crown dimension is same, only staple leg different, can produce on same machine by change of railway width. If staple crown dimension is different or bending angle is different, need to exchange full set of railway system.
Technical parameter of roll type carton closing staple machine
| Model | ST-RCC |
| Flattening motor | 0.75KW |
| Cutting and forming motor | 0.5KW |
| Capacity | About 150pcs/min |
| Produced staple size | Crown size 32/35mm, leg length 15/18/20/22mm, flatten wire size 0.9*1.9mm/0.9*2.3mm |
| Machine weight | 300kgs |
| Machine size | 1000*700*1500mm |
Two sets zinc coated round steel wire in coils are put on passive driven type wire stands pay-off, then go through two pairs of straightening rollers(one in vertical and one in horizontal), separately go into each own pair of flattening rollers to form flatten wire(the distance between two flattening wire can be adjusted according to actual size need). Then be cut and punched into required shape type single wire, meanwhile be sticked together by A+B glue, then get induction heating and blowing drying, then cut into required length of staple.
For all sizes, machine structure is same. When the staple crown dimension is same, only staple leg different, can produce on same machine by manual length regulation. If staple crown dimension is different, need to exchange full set of railway system.
When want to produce single divergent point staple, need to disassembly off one cutting mold and offer only one wire for pay-off.
Technical parameter of divergent point staple machine:
| Model | ST-ZZ |
| Flattening motor | 2sets, each power 0.5KW |
| Cutting and forming motor | 0.5KW |
| Capacity | About 150pcs/min |
| Machine weight | 330kgs |
| Machine size | 1000*700*1500mm |
Company Profile
Sticking to the principle of quality for survival and reputatiton
for development, our company continuously develops new products and
improves their quality.
Hangzhou Suntech Machinery Co., LTD is sincere in cooperation with
people from all walks of life to create jointly great success!
