Active Member
|
[China]
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Mike
Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
|
High Speed Automatic Plastic Bottle Molding Machine 800Pcs / Hour SRB80D-3 , 1L & 2L Plastic Bottle Manufacturing Machine , Small HDPE Bottles Extrusion Blow Moulding Machine
QUICK VIEWS
1. SRB80D-3 is double station triple head blow molding machine, specially used for 1L to 1.5L small bottles.
2. Its output for 1L bottle or jerry can is 800 Pcs/hour, the daily capacity is about 20000 Pcs.
3. Triple head central distance is 160mm, bottle width or diameter must be smaller than 135mm.
|
TECHNICAL PARAMETERS
| Machine Model | Automatic Plastic Bottle Blowing Machine |
| Max Product Volume | 2 L |
| Machine Weight | 8.2 Tons |
| Machine Size | 4.5 x 3.8 x 2.7 m |
| Screw Diameter | 80 mm |
| Plasticizing Capacity | 110 KG |
| Clamping Force | 110 KN |
| Platen Size | 500 x 450 mm |
| Platen Opening Stroke | 200~600 mm |
| Max Mould Size | 530 x 400 mm |
| Triple Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 150 mm |
| Total Power | 73.6 KW |
| Average Energy Consumption | 45 KW |
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 5 x 4 m
2. Production Area: 12 x 8 m
3. Minimum Workshop Height: 3.5 m
4. Air Supply Requirement: 1.2m3/min, 0.8Mpa
5. Water Supply Requirement: 7.5 Tons
6. Machine Power Consumption: 45 KW
7. Production Line Power Consumption: 66 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 1~2 Workers
|
PRODUCTION FLOW
The working flow of 5L double station plastic container manufacturing machine production flow is basically like this. The PLC in the electronic control case sends the instruction, the hydraulic system receives the instruction, the fuel tank and the motor start to operate, drives the screw to run, and extrudes the embryo through the die head. The opening and closing mold begins to be closed, the needle is blown, cooled, and plastic products are formed.
MACHINE ADVANTAGES
1. Our continuous extrusion blow moulding machines cover 0~30L bottles, jerry cans, jars, containers, kettles, small toys, pipes and other hollow articles. Based on your capacity requirement, we can adopt single head, double head, triple head, four head and six head with good material runner design.
2. According to your demand of packing objects and cost control, our machine can be made with co-extrusion of 2~4 layers and view stripe line. The design concept of us to 0~30L machine is stable working performance, fast production speed, higher automatic degree and lower fault rate.
3. Total machine control system well match with scraps on-line deflashing, neck rotary cutting, in-mould labeling, leakage testing, product conveying & packing. Optimized hydraulic system with reasonable design to control pressure and flow of double proportion, acchieve action execution fast, stable and accurate. High hardness bimetallic screw with good structure design and modulation, insure bigger plasticizing capacity, less wearing and longer working lifespan.
4. Rich experience in whole producing line arrangement and layout, totally automatic running from material feeding to finished product packing. Colorful touch screen, aluminum cantilever operation box, bottle collective guidance shelves, scraps sliding channel and safety protection are included.
