Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
2 Head HDPE Blow Moulding Machine For 1 Liter Spray Plastic Bottle SRB70D-2
QUICK VIEWS
1. SRB70D-2 specially used for PE & PP small bottles, jerrycan, containers and jars from 250ml to 1500ml.
2. Machine total control system with convenient operation page design suitable for remote technical support.
3. Adopt pressure / flow double proportion control for hydraulic system, insure platen moving speed & smoothness.
4. The output for 1L hdpe flat spray bottle is 550 Pcs/hour, the output for 1L hdpe round bottle is 600 Pcs/hour.
|
TECHNICAL PARAMETERS
Machine Model | Double Station Extruder Blowing Machine |
Max Product Volume | 2 L |
Machine Weight | 5.5 Tons |
Machine Size | 3.8 x 2.2 x 2.5 m |
Screw Diameter | 70 mm |
Plasticizing Capacity | 90 KG |
Clamping Force | 68 KN |
Platen Size | 320 x 390 mm |
Platen Opening Stroke | 150~500 mm |
Max Mould Size | 360 x 360 mm |
Double Head Central Distance | 160 mm |
Max Product Diameter or Width | 135 mm |
Material Cutting Method | Hot Cutting |
Max Die Diameter | 100 mm |
Total Power | 48.5 KW |
Average Energy Consumption | 31.5 KW |
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick,
stable.
8. Electrical Components: All of the electrical components are made
in Japan and Taiwan.
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 31.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
PURCHASE & SERVICE FLOW
1. Get customers' sample or product information to select the
suitable blow molding machine model.
2. Communicate and negotiate to customers' detailed requirements
and provide solution plan.
3. Confirm payment terms, price discount and make proforma invoice
or contract, arrange down payment.
4. Start order production and report to customers the manufacturing
progress in every week.
5. Machine is finished for mould test, bring forward commissioning
report and arrange tail in works.
6. Invite customers for checking and acceptance,operation training,
arrange loading and delivery.
7. Dispatch engineer for installation and commissioning, arrange
machines' layout in customer' s site.
8. One year guarantee, after sales services, share our experience
and remote technical support.
9. Feedback in time for customer's problem, provide solutions and
customer's new project consulation.