Active Member
|
[China]
Address: North Industry Zone , Huanyang , Zhejiang Province, China
Contact name:Lisa Lee
Taizhou Huyang Reliable Machinery Co.,Ltd |
|
|
Full Automatic Straight Shaped Cans PET Bottle Blowing Machine 1000BPH 26KW
Introduction
1. Touch screen control and temperature adjustment make it easy to blow different bottle type temperature regulation.
2. Its servo transmission system has high positioning accuracy, fast and stable speed, good reliability, no gas source saving energy, low maintenance cost, and the tension rod is controlled by servo motor.
3. Bottle blowing machine has the advantage that can be segmented stretching, bottle embryo location and first, to ensure that the stretch when the bottle embryo verticality, second drawing again, to ensure that every bottle embryo tensile uniformity and consistency. Fast stretch and accurate position.
4. The bottle blowing machine is used for PET water bottle, hot filling bottle, steam drink bottle, edible oil bottle, pesticide bottle and so on.
5. Bottle blowing machine adopts servo control system, which has the characteristics of stable and reliable structure, fast and stable, easy to maintain, convenient and convenient for mould, and meets the need of continuous production on-line.
Flow chart
High Pressure Air Compressor -- Air Tank -- Air Fiter -- Air Dryer -- Low Pressure Air Compressor -- Air Fiter -- Full Automatic Blow Moulding Machine -- Mould -- Water Chiller
Specifications
| 1. CE Certificate |
| 2. Different Shape Bottle |
| 3. Double/Single Statio |
System Introduction
| 1. Exploded bottles ejection unit |
During the blowing process, if the bottle burst, it can be automatically removed. This prevents the bad bottles into the filling machine.
| 2. HP air recovery system |
After the bottle blowing accomplished, high-pressure air can be recycled can be used again for the pre-blowing and operational movement.
| 3. Oven and preform temperature detection system |
Real-time detect the temperature of the oven and the temperature of the preform after
heating before blowing. When the preform heating temperature does not reach the set blowing temperature blowing workstation will alarm, not blown.
Characteristics:
1. Controlled by MITSUBISHI touch screen computer. Operate consistently and simply. |
2. Pneumatic elements from FESTO (German) and SMC (Japan) |
3. Energy-saving and environmentally friendly design. Mechanical units are compact and rational. |
| 4. Malfunction alert and diagnostic units allow easy maintenance. |
| 5. Suitable for manufacturing a variety of PET bottles: mineral water bottles, edible oil bottles, soda bottles, medicine bottle, cosmetics bottles etc.. |
6. Oven can be made according the different preform requirements of customers |
7. Low cost,high efficiency,easy operation,easy maintenance,etc,with automatic technological process. |
Mold ing | Clamping Force | kg | 12000 | |
| Clamping Stroke | mm | 125 | ||
| Stretching Stroke | mm | 300 | ||
| Bottom Stroke | mm | 40/70 | ||
| Cavity Spacing | mm | |||
| Number of Cavity | Cavities | 1 | ||
| Carriage Unit | pcs | 26 | ||
| Theoretical Output | bph | 800-1000 | ||
Electrical System | Total Power | kw | 26 | |
| Heating Power | kw | 16×1.5KW=24 | ||
| Number of Lamp Layers | Layers | 8 | ||
Air System | Operating Pressure | kg/cm2 | 7-9 | |
| Lower Pressure Air Consumption | ltr/min | 1600 | ||
| Blowing Pressure | kg/cm2 | 20-30 | ||
| High Pressure Air Consumption | ltr/min | 1600 | ||
Chiller | Operating Pressure | kg/cm2 | 2-4 | |
| Temperature Range | ℃ | 10-12 | ||
| Consumption | kcal/hr | 2000 | ||
| Flow Rate | ltr/min | 130 | ||
Main Machine | Main Machine Dimensions | mm(L*W*H) | 1950×1850×2100 | |
| Main Machine Weight | kg | 1850 | ||
Preform Loader | Perform Loader Dimensions | mm(L*W*H) | ||
| Perform Loader Weight | kg | |||
Option Introduction
| 1- Blowing system |
- Short mould stroke, quick action.
- Wide adaptability, suitable for every type mould thickness.
- Special design, high rigid compound die structure.
- High responsiveness pneumatic components, action timely and precisely.
- Small size, low investment. One person enough to operate, simple and safe.
| 2- Preform Injection |
- Through safe operation mechanism, start-up with two hands, avoid the accident during the operation.
- Adopt the theory of heat transfer and feedback while designing the shape and thickness of preform.
- Automatic feeding and automatic dropping the bottles.
- Small size and compact construction with no space waste.
| 3- Heating Parts |
- Adopt special electronic controlling circuit for heating, high efficiency in simultaneous controlling.
- One lamp or more, lower power consumption.
- The preform will be heated evenly, not be influenced by outside environment.
Cooling system with cold air cycle ensures same heat exposure of internal and external surface.
Brand List
| Electrical components | Cylinders | ||
| PLC | Taiwan Delta | clamping cylinder | Japan SMC |
| touch screen | Taiwan Delta | stretching cylinder | Japan SMC |
| relay | France Schneider | preform-feeding flipping cylinder | Germany FESTO |
| circuit breaker | France Schneider | bottle-takeout flipping cylinder | Germany FESTO |
| air switch | France Schneider | first-stage, second-stage slide cylinder | Japan SMC |
| power supply | France Schneider | heating cylinder | Japan SMC |
| proximity switch | France Schneider | Preform-separating cylinder | Japan SMC |
| photoelectric switch | France Schneider | Manipulator cylinder | Japan SMC |
Reliable sample service
1. Send you video of the running machine.
2. Welcome to come to visit our factory, see the detail of machines.
3. Well-trained & experienced staff are to answer all your inquiries in English and Chinese
Reliable Customized service
1. Design the machines according your requirements(material, voltage , filling type, various bottles, specially designed device and so on) .
2. Reliable Professional suggestion, as you know, our company is among the best in the beverage machinery industry and our engineer has experience for many years.
3. Design layout for you and offer you advice about machine orientation or based on the factory area you have.
Reliable After-sales service
1. Deliver the machine and provide the B/L on time to make sure you can get the machine quickly. Also send operating manual and instruction.
2. If you need, our professional engineer team will go to your factory to install the machine and train your employee until they can operate the machine well.
3. Regular after-sales calling to remind customers to add the lubricating oil and maintain machine.
4. Service office in Dubai and other countries and will also visit customers’ factories to check the machines.
5. The machines from Reliable Machinery has one year warranty for free and totally five years life-long technical support.
6. 24 hours for engineer response
